(DI-1911) Complete List of Default KPIs

This is a complete list of KPIs:

KPI	Description	Long description	Monitoring area	KPI area (collected for)	Server selection (Server specification)	Collected on	Collector	Profile	Recommended mon.period
APP_LOGS	Number of application logs	The kpi value represents a count of application logs.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_APPLOG
ARFC_FREE	Number of available (free) WP for aRFC resources	Calculates resources of an application server. Collects number of available work processes for asynchronous RFC resources. For more information go to: https://help.sap.com/saphelp_nw70ehp2/Helpdata/en/7f/06363dc992752de10000000a114084/frameset.htm	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ARFC		5 MI
ARFC_FREE_P	Percentage of available (free) WP for aRFC resources	Calculates resources of an application server. Collects percentage of available work processes for asynchronous RFC resources. For more information go to: https://help.sap.com/saphelp_nw70ehp2/Helpdata/en/7f/06363dc992752de10000000a114084/frameset.htm	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ARFC	DEF_5MIN	5 MI
ARFC_WAIT (OBSOLETE)	Wait time of aRFC for free WP	If no more resources are available, the system offers the caller a wait time. The maximum wait time (max_wait) is set using the profile parameter rdisp/rfc_max_wait_time. The default is 15 seconds. The wait time is calculated as follows: quota = resource * parameter value / 100 count = current usage of resource As no resources are provided, count > quota wait = min (max(1,count-quota), max_wait).	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ARFC
BAT_DB_INSERT_AG	Average DB insert	Insertion is a process, where array insert of N entries from internal table. N is by default 10 000 entries, but can be changed with the parameter NUM_RECORDS of the collector /DVD/MON_BAT_CL_DB. This KPI shows average database insert.	BENCH	SYS	any server	Central system	/DVD/MON_BAT_CL_DB	DEF_5MIN	5 MI
BAT_DB_INSERT_MS	DB Insertion benchmark	Insertion is a process, where array insert of N entries from internal table. N is by default 10 000 entries, but can be changed with the parameter NUM_RECORDS of the collector /DVD/MON_BAT_CL_DB. Database insertion benchmark displays this KPI.	BENCH	SYS	any server	Remote system	/DVD/MON_BAT_CL_DB	DEF_5MIN	5 MI
BAT_DB_SELECT_AG	Average DB select	Select - with WHERE clause on primary key, such as to select all N entries. N is by default 10 000 entries, but can be changed with the parameter NUM_RECORDS of the collector /DVD/MON_BAT_CL_DB. Database select and it's average is measured by KPI with name BAT_DB_SELECT_AG.	BENCH	SYS	any server	Central system	/DVD/MON_BAT_CL_DB	DEF_5MIN	5 MI
BAT_DB_SELECT_MS	DB Select bechmark	Select - with WHERE clause on primary key, such as to select all N entries. N is by default 10 000 entries, but can be changed with the parameter NUM_RECORDS of the collector /DVD/MON_BAT_CL_DB. This KPI shows database select benchmark.	BENCH	SYS	any server	Remote system	/DVD/MON_BAT_CL_DB	DEF_5MIN	5 MI
BAT_DB_UPDATE_AG	Average DB update	Update - with WHERE clause on primary key, such as to update single non-key field on N entries. N is by default 10 000 entries, but can be changed with the parameter NUM_RECORDS of the collector /DVD/MON_BAT_CL_DB. Process of average DB update is displayed by this KPI.	BENCH	SYS	any server	Central system	/DVD/MON_BAT_CL_DB	DEF_5MIN	5 MI
BAT_DB_UPDATE_MS	DB Update benchmark	Update - with WHERE clause on primary key, such as to update single non-key field on N entries. N is by default 10 000 entries, but can be changed with the parameter NUM_RECORDS of the collector /DVD/MON_BAT_CL_DB. Database update benchmark is processed this KPI.	BENCH	SYS	any server	Remote system	/DVD/MON_BAT_CL_DB	DEF_5MIN	5 MI
BO_PROBE_BI_LAUNCH_PAD_EXETIME	BI_Launch_pad Probe Exec. Time		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_BI_LAUNCH_PAD_RESULT	BI_Launch_pad Probe Result		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CMS_CACHE_EXETIME	CMS Cache Probe Exec. Time		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CMS_CACHE_RESULT	CMS Cache Probe Result		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CMS_DB_CONN_EXETIME	CMS DB Connection Probe Exec. Time		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CMS_DB_CONN_RESULT	CMS DB Connection Probe Result		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CMS_LOGON_EXETIME	CMS Logon Probe Exec. Time		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CMS_LOGON_RESULT	CMS Logon Probe Result		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CMS_PING_EXETIME	CMS Ping Probe Exec. Time		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CMS_PING_RESULT	CMS Ping Probe Result		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CRS_PCS_EXETIME	Crystal Rep. Serv. through Page and Cache Ser. Exec. Time		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CRS_PCS_RESULT	Crystal Rep. Serv. through Page and Cache Ser. Result		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CRS_RAS_EXETIME	Crystal Reports Service through RAS Probe Exec. Time		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_CRS_RAS_RESULT	Crystal Reports Service through RAS Probe Result		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_WEBI_EXETIME	Web Intelligence Probe Exec. Time		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_PROBE_WEBI_RESULT	Web Intelligence Probe Result		BOBJ	SER	only external server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_ENTNOD_HS	Enterprise Nodes Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_ANASER_HS	Analysis Services Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_CONSER_HS	Connectivity Services Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_CORSER_HS	Core Services Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_CRYREPSER_HS	Crystal Reports Services Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_DASSER_HS	Dashboards Services Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_DATFEDSER_HS	Data Federation Services Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_HS	Service Categories Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_PROMANSER_HS	Promotion Management Services Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERCAT_WEBISER_HS	Web Intelligence Services Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BO_TOP_HIER_SERGRP_HS	Server Groups Health State		BOBJ	SYS	any server	Remote system	/DVD/MON_BO_CL_COL_BOBJ	BO_1MIN_PR	1 MI
BTC_NUM_DELAYED	Number of delayed background jobs ( => 60 seconds)	The kpi value represent a count of background jobs that waiting for free work process more then 60 seconds.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_BTC_CL_COL_JOBS	DEF_5MIN	5 MI
BTC_NUM_FAILED	Number of failed background jobs	The kpi value represent a count of background jobs that failed.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_BTC_CL_COL_JOBS	DEF_5MIN	5 MI
BTC_NUM_LONGRUN	Number of background jobs running too long ( >= 10 minutes)	The kpi value represent a count of background jobs that running more than 10 minutes.	SAPSYS	SYS	any server	Remote system	/DVD/MON_BTC_CL_COL_JOBS	DEF_5MIN	5 MI
BW_12503CNT	Javastack: count number of 12503		JAVAST	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12503CNT_NOTA	Javastack: count number of 12503 on not authorized node		JAVAST	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12503CXMN_AVG	Javastack: count number of 12503 Xminute-avg per node hourly		JAVAST	SYS	any server	Central system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12503CXMN_MAX	Javastack: count number of 12503 Xminute-maximum node hourly		JAVAST	SYS	any server	Central system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12503CXMN_MIN	Javastack: count number of 12503 Xminute-minimum node hourly		JAVAST	SYS	any server	Central system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12503CXMN_MNV	Javastack: count number of 12503 Xminute-variance min node		JAVAST	SYS	any server	Central system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12503CXMN_MXV	Javastack: count number of 12503 Xminute-variance max node		JAVAST	SYS	any server	Central system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12503HEAPMAX	Javastack : Max value of heap for all nodes	There are 10 nodes per system BW, instead of capturing and storing the memory of each node, we capture the memory of the most loaded. If the value remains at 84%, the memory consumption is too high. Check event 12505 above.	JAVAST	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12503MISSUSR	Javastack : No of users with 12502 without 12503 after x min	When a web template v7 starts, it creates an entry 12502 in rsddstat_olap. At the end it create entry 12503. If a template fails on javastack, there is a 12502 without 12503. There is a timeout after 15minutes so a javastack session cannot take more than 15 minutes. However a javastack session should take only few seconds to 1 minute as it’s a user tool (not batch). This indicators count how many users have sessions 12502 not followed by 12503 after 5 minutes, one the same node. For all the KPI on javastack, we need at least BW730SP8 and BI JAVA SP7 Patch 30. See oss note: <a href='https://service.sap.com/sap/support/notes/1069253'> Note 1069253 - BEx Web 7.x: Monitoring server node memory use in OLAP stats</a>	JAVAST	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12505NO	Javastack : No of queries rejected (stat 12505)	When memory on javastack is above rsadmin threshold, javastack will reject the request from the user (the we template will not run) and instead it will create an entry in rsddstat_olap event 12505. This KPI should be zero. If there is an issue (eg GC stucked) on memory of the javastack, this KPI will be greater than zero.	JAVAST	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_12640NO	Javastack : No of javastack cache refresh (stat 12640)	Cache refresh is done at javastack restart (or forced manually to refresh rsadmin parameter but this should be expectionnal). If no manual refresh is done,this indicator counts the javastack restarts.	JAVAST	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_JAVAST_EVT	BW_5MIN	5 MI
BW_9000DMMISS	Number of queries failing on DM (BWA, DB, HANA)	When a queries fails on datamanager (db2 or bwa),there is an entry in rsddstat_olap with event 9000 but no entries in rsddstat_dm. Queries can fail on db2 (eg dump signal 11) or on bwa (eg if all memory is used) or on hana.The count shows how stable (or unstable) is db and bwa. A restart of bwa will make several queries to fail so will increase this value, like a reorg or a memory issue or a BWA index corrupted, or query above the safety belt of 40 million cells.No reaction expected if there is only 1 or 2 failures, but if many queries are failing at the same time it’s a general issue that needs to be addresses and reoccurrence must be prevented.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_5MIN	5 MI
BW_AGGR_USAGE	Aggregate usage	Every 5 minutes we calculate the number of aggregate hit by comparing rsddstataggrdir field "usage" per aggregate with the previous snapshop. And table /DVD/MON_BWAGGRU is updated with the number of hit per aggregate per day. This is to find which aggregate are not used and can be deactivated to improve runtime of changerun and rollup.	BW	SYS	only application server	Remote system	/DVD/MON_BW_CL_COL_AGGR_USAGE	BW_5MIN	5 MI
BW_D_IP_ABTHRS	Yesterday's Number of IP with more than X packets	It is the number of request that was running yesterday (either started or finished yesterday) with more than 100 packets (100 is a parameter of the collector and can be changed). The detail can be seen in the detail tab, "BW Daily stats on Infopackages" or in table /DVD/MON_BWDIP. The KPI is using following tables or could use in the future the following tables : RSMONICDP : RNR, cube, request, timestamp, rec_INSERT. index TSP on timestamp RSREQDONE RNR > ZPAK</BR> RSLDPIO -ZPAK > DataSource.... oltptyp = M master data, D transactional RSDDSTATWHM - RNR runtime rsmonfact - not used as too large. Can be used in the future to calculate UR runtime of each packet</BR> rsmonmess - take min timestamp from second line (first line is extraction time) = starttime and max = endtime per packet</BR> rsiccont - targets per request For the DTP, the following table could be used to enhance the KPI or a new KPI. RSBKREQUEST gives all DTP request (number of rows, time start, end) and DTP number RSBKDTP gives the details for the DTP (source and target) RSBKDATAPAKID for each packet of a DTP request, provides number of rows extracted, processed	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_GET_D_IP	BW_1DAY	1 DA
BW_DURATTRIBCHAN	BW duration running attribute changerun	During changerun, many bw jobs are locked so it is important that the attribute changerun is not too long. This kpi calculates the Runtime of the currently running job BI_PROCESS_ATTRIBCHAN, BI_STRU* or BI_CHANGERUN_RESTART. The value of the kpi iscalculated only for the running jobs and not the job finished; so the final actual runtime will be higher than the last value captured, but in the same range.If runtime is too long, administrators can be informed and can decide to drop aggregates if the adjust is too long running (ie jobg BICHNG), check runtime of activation of MD (BIACTI jobs) and create db indexes if needed and check that the number of changes in IO is normal (same number of changes in source system and not increased by a bug orconflicting loads).	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_BATCH	BW_5MIN	5 MI
BW_DURCOMPRESS	BW duration of longest running cube compression	This indicator shows the longest running cube compression, i.e. the longest running job BI_COMP. The value of the KPI is calculated only for the running jobs and not the job finished; so the final actual runtime will be higher than the last value captured, but in the same range. By calculating this value every few minutes, this allow to raise an alert if there is a long running cube compression and take abap, sql traces to investigate the performance of this cube compression.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_BATCH	BW_5MIN	5 MI
BW_DURDBINDEX	BW duration of longest running DB indexing	The SAP default is to drop indexes before the load and recreate the index after the load in the process chain. This is fine for full loads; but for delta, it can take hours to recreate the index. The time saved to load a small delta can be much lower than the time to rebuild. This indicators shows the longest running job BI_PROCESS_INDEX. The value of the kpi is calculated only for the running jobs and not the job finished; so the final actual runtime will be higher than he last value captured, but inthe same range. By calculating this value every few minutes, this allow to correlate those long running job and other issue on the system. If this is not required; this indicator can be deactivated and replaced by a daily check of the job BI_PROCESS_INDEX.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_BATCH	BW_5MIN	5 MI
BW_DURLOADING	BW duration of longest running DTP	This indicators shows the longest running DTP, ie the longuest running job BIDTPR_*. The value of the kpi is calculated only for the running jobs and not the job finished; so the final actual runtime will be higher than the last value captured, butin the same range. By calculating this value every few minutes, this allow to raise an alert if there is a long running DTP and take abap, sql traces to investigate the performance of this DTP.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_BATCH	BW_1HOUR	1 HO
BW_DURLOADIP	BW duration of longest running InfoPackage	This indicators shows the longest running InfoPackage. From the enqueue of the running IP, we check the start time and calculate the delay between start time and current time.By calculating this value every few minutes, this allow to raise an alertif there is a long running infopackage and take ABAP, SQL traces to investigate the performance of this infopackage. See table BW infopackages to see for the top N requests, the request number, number of packets, runtime, infopackage, datasource. Only infopackages with more than 50 packets or duration greater than 1800 seconds are recorded. Sometimes values are incorrect as no enqueue will be visible, this can lead to missing data but the trend should be always correct.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_GET_IP	BW_1HOUR	1 HO
BW_DURMDACTIVAT	BW duration of longest running MD activation	This indicator shows the longest running Master Data activation job during changerun, i.e. the longest running job BIACTI_*. The value of the KPI is calculated only for the running jobs and not the job finished; so the final actual runtime will be higher than the last value captured, but in the same range.By calculating this value every few minutes, this allow to raise an alert if there is a long running MD activation and take SQL traces to create the required index (usually CHANGED OBJVERS) on table P,Q,X,Y.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_BATCH	BW_1HOUR	1 HO
BW_DURODSACTIVAT	BW duration of longest running ODS activation	This indicators shows the longest running ODS (DSO) activation job, for the DSO where activation is done in batch and with at least 2 jobs in parallel (i.e. runtime of the running BIBCTL* jobs). The value of the KPI is calculated only for the running jobs and not the job finished; so the final actual runtime will be higher than the last value captured, but in the same range for the job BIBCTL that are slow. By calculating this value every few minutes, this allow to raise an alert if there is a long running DSO activation and take SQL traces to analyze the issue (can be system hanging due to backup hang, lockwait, network issue, missing DB index, missing DB stats…). For packet size of 20.000 rows, normal runtime should be between 20 and 60sec. Everything above 500sec should be investigated.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_BATCH	BW_1HOUR	1 HO
BW_IP_MAX_PACKET	BW IP max number of packets (multiplied by number of target)	Infopackage loads spend too much on enqueues when the number of packets multiplied by the number of targets is more than 1000. We can have 500 packets and one target without performance issues, but if we have 500 pakets and 10 targets, then most of the time will be spend on enqueue and not on processing the data. The number of packets not multiplied by the number of targets is not relevant and therefore not saved as a KPI. Below, when we refer to number of packets, it’s always multiplied by the number oftargets.This indicators shows the highest number of packets (multiplied by the number of targets) in the running InfoPackages. From the enqueue of the running IP, we check the packet number that we can find in the monitor, and we multiply by the number of targets for this IP. If there are 2 IP running with more than 1000 small packets, there are so many ENQ processed that we have seen situation where system became very slow and rapidly 100% of the DIA WP were used. By calculating thisvalue near real time, this allows to raise an alert and review the packet size (roosprms), number of rows in the IP. For full recovery loads, if the number of packets will be very high, it can be faster to kill the load and repeat with less packets. See tab « details » - « BW infopackages » to see for the top N requests, the request number, number of packets, the number of targets, number of packets multiplied by the number of targets, runtime, infopackage, infosource, source, datasource.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_GET_IP	BW_1HOUR	1 HO
BW_NR_MAX_DIFF	Maximum from incremental diffrence of all number ranges		BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_NUM_RANGE	BW_1DAY	1 DA
BW_NR_MAX_SPEED	Maximum from incremental speed of number ranges per day		BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_NUM_RANGE	BW_1DAY	1 DA
BW_NR_OVER_THR	Count of number range which are over threshold		BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_NUM_RANGE	BW_1DAY	1 DA
BW_NR_TOTAL_DIFF	Maximum from incremental diffrence of all number ranges		BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_NUM_RANGE	BW_1DAY	1 DA
BW_NR_TOTAL_SPEE	Incremental speed from all number ranges per day		BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_NUM_RANGE	BW_1DAY	1 DA
BW_PC_STEP_COUNT	BW PC step count	Number of steps that finished since the last execution of the agent.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_PC	BW_1HOUR	1 HO
BW_PC_STEP_ERR	BW PC step error	Number of steps that finished in error since the last execution of the agent. If there are several steps in error in the last x minutes; it can show a general issue on the system (all BTC or DIA used, transaction log full, rollup failed as locked by failed CR).	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_PC	BW_1HOUR	1 HO
BW_ETL_EXCEEDED_PC	Number of long running Process chains	Total number of currently running Process chains which runtime exceeded the maximum time-limit for its execution.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_ETL_PC	BW_1HOUR	1 HO
BW_ETL_FAILED_PC	Number of failed Process chains	Total number of failed Process chains.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_ETL_PC	BW_1HOUR	1HO
BW_ETL_FINISHED_PC	Number of successfully finished Process chains	Total number of successfully finished Process chains	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_ETL_PC	BW_1HOUR	1 HO
BW_ETL_RUNNING_PC	Number of running Process chains	Total number of currently running Process chains	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_ETL_PC	BW_1HOUR	1 HO
BW_QUERY_ERROR	Number of erroneous BW Queries	Total number of query executions which ended with an error.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_QUERY_RT	BW_1HOUR	1 HO
BW_QUERY_LONG_RUN	Number of long-running BW Queries	Total number of queries which are running longer than the defined threshold.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_QUERY_RT	BW_1HOUR	1 HO
BW_QUERY_RUNTIME	Number of executed BW Queries	Total number of BW query executions.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_QUERY_RT	BW_1HOUR	1 HO
BW_RSICCONT_GR12	Forecast RSICCONT Growth in 12 months	The admin table RSICCONTcontains one entry per "load request", each request goes in one provider. When there are too many rows in table RSICCONT for the same provider, the loads / monitor will generate many ENQ and it will slow down the system. This KPI is a forecasted value in 12 months. Looking at speed of increasing of the number of rows in RSICCONT over a month, a forecasted growth is calculated. The forecast is adjusted every day.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSICCONT	BW_1DAY	1 DA
BW_RSICCONT_MX12	Forecast RSICCONT Max number of entries per cube in 12months	The admin table RSICCONT contains one entry per "load request", each request goes in one provider. When there are too many rows in table RSICCONT for the same provider, the loads / monitor will generate many ENQ and it will slow down the system. This KPI is a forecasted value in 12 months. Looking at speed of increasing of the number of rows in RSICCONT over a month, a forecasted growth is calculated (see kpi definition "RSICCONT Growth in 12 months"). The current number of rows in RSICCONT plus the forecasted growth gives the forecasted number in 12 months.Table /DVD/MON_BWRSICC in the satellite system will give you the number of entries per target. When the current value or forecasted value is above 6-7000, consider using report RSSM_REDUCE_REQUESTLIST (check oss Note 1431315 - P24: Reducing very large request lists in InfoCubes and DSOs).	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSICCONT	BW_1DAY	1 DA
BW_RSMONMESSPAC	BW Sum max number of packets for all running PSA		BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_GET_IP	BW_1HOUR	1 HO
BW_SID_GR12	Forecast SID Growth in 12 months		BW	SYS	only application server	Remote system	/DVD/MON_BW_CL_COL_SID_GROWTH	BW_1DAY	1 DA
BW_SID_MX12	Forecast SID Max level in 12 months		BW	SYS	only application server	Remote system	/DVD/MON_BW_CL_COL_SID_GROWTH	BW_1DAY	1 DA
BW_SSQL_ALLNO	SQL-Total number of subqueries	Number of queries on the DB (infact running SQL statement, op mode 0) to correlate with performance issue if needed.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_1HOUR	1 HO
BW_SSQL_ALLTIM	SQL-Total time spent on subqueries	Cumulated time of all queries running on the DB (infact running SQL statement, op mode 0) to correlate with performance issue if needed.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_1HOUR	1 HO
BW_SSQL_SQAR	SQL-Average runtime of small subqueries	Queries are split in subqueries, one per cube. Runtime of each subquery are available in table rsddstat_olap for the query with option save "all" stats. Per definition, small subqueries are scanning less than 10 million rows and returning less than 10.000 rows. This KPI is the average runtime of the small queries.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_1HOUR	1 HO
BW_SSQL_SQLO	SQL-No of small subqueries long running (eg > 10 SEC)	This KPI is the number of small queries running for more than 10sec.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_1HOUR	1 HO
BW_SSQL_SQNO	SQL-No of small subqueries	This KPI is the amount of small subqueries.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_1HOUR	1 HO
BW_SUBQ_ALLNO	nonSQL-Total number of subqueries (BWA or HANA)	Number of queries executed on BWA, to find period will too many queries in parallel and look for work around if memory / performance is impacted by this. Eg remove parallelization setting of some queries. It also provide a benchmark, we know what can be achieve without degradation.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_5MIN	5 MI
BW_SUBQ_ALLTIM	nonSQL-Total time spent on subqueries (BWA or HANA)	Cumulated time spent on BWA of all subqueries. Also to know if we are reaching some limit.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_5MIN	5 MI
BW_SUBQ_SQAR	nonSQL-Average runtime of small subqueries (BWA or HANA)	When using op mode 2 in BWA, queries are split in subquery, one per cube. Per definition, Small subqueries are scanning less than 10 million rows and returning less than 10.000 rows. Those should run for 1sec on BWA. This indicator calculates the average BWA runtime of small queries.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_5MIN	5 MI
BW_SUBQ_SQLO	nonSQL-No of small subqueries long running (eg>10SEC) eg BWA	See above the definition of small subqueries. If the average is slow, to appreciate the impact, this KPI provides the number of subqueries running for more than 10sec. If there are 5 or 10.000 subqueries running too slow, the impact on the business is not the same.	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_5MIN	5 MI
BW_SUBQ_SQNO	nonSQL-No of small subqueries (BWA or HANA)	This KPI is the amount of small subqueries (nonSQL).	BW	SYS	any server	Remote system	/DVD/MON_BW_CL_COL_RSDDSTATS	BW_5MIN	5 MI
BWA_AGE_NEWSID	BWA : Age of oldest SID not processed	If master data sids are not updated in BWA, entries will remain in table rsddtrexnewsid. Table /DVD/MON_NEWSID contains the oldest sid and timestamp of rsddtrexnewsid. This Kpi is the age of the oldest SID not updated in BWA. Check if attribute change run has failed or long running. Check bwa alerts for Master data index has been corrupted. Check Job BI_BIA_NEWMD_INDEX. Check application log : TCode SLG1, Filter : Object = "RSDDTREX" Subobject = "TAGGRFILL" Check that object is still active (table rsddbobjdir or transaction rsddb). We checked for the above in SLG1. every thing is fine. Hence we are closing the ticket. Please find the added attachment.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWASID	BWA_1HOUR	1 HO
BWA_ALERT_RED_NO	BWA : Number of red alerts	This is a count of number of red alerts in TREXADMIN. The details of the alert can be seen in ‘Details’ tab, BWA Alerts.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_1HOUR	1 HO
BWA_CPU_USED	BWA : CPU load on most loaded blade	This KPI is the max cpu load (of all blades) calculated by TREXADMIN, FM TREX_EXT_LOAD_HISTORY since the last execution.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_INDX_INA_DUR	BWA : Missing or inactive bwa cube index - duration	When a cube index is created, the list of index that have been active once (table /DVD/MON_BWAINDX) is automatically updated on the satellite system at the next run of the agent. At each execution of the agent, CanaryCode checks that all indexes exist and have status ACT. If an index is missing, CanaryCode flags the index as missing, calculate since when it’s missing and update the list that is visible from tab ‘Details’, "BWA inactive indexes".This kpi is the max missing period for all cubes.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_1HOUR	1 HO
BWA_INDX_INA_NO	BWA : Missing or inactive bwa cube index - number	When a new bwa cube index is created , it is added automatically in table /DVD/MON_BWAINDX. An index can be missing for some time (example cube index is dropped and recreated after selective deletion), but if they are missing for too long, we want to be alerted. At each execution of the collector we check that all indexes contained in table /DVD/MON_BWAINDX have status ACT. This KPI counts the number of index missing for more than an authorized period value. The authorized period value can be maintain for each cube in /DVD/MON_BWAINDX, by default it’s 90 minutes. If an index is deleted and will not be rebuild, it should be removed from /DVD/MON_BWAINDX to avoid the alert. The list of missing index is visible from tab ‘Details’, "BWA inactive indexes", column "alert" contains value ‘X’ if the index has been missing for more than the authorized period value.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_1HOUR	1 HO
BWA_IS_PING	BWA : IS Ping time	This kpi is the "ping" time calculated by TREXADMIN, FM TREX_EXT_LOAD_HISTORY field IS_PING_TIME, between the nameserver and the indexserver. The nameserver contacts each indexserver to check if the connection works fine. This KPI is the max value (of all blades) captured since the last execution.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_SERVICE_INAC	BWA : No of services inactive	At each execution of the agent, we check the status of each service reported by TREXADMIN. This kpi counts the number of services where the status is not green. Sometimes the status is undefined (not green, not red) but it’s visible only from time to time, so if CanaryCode reports that some services are inactive, filter status on active NE green and refresh regularly to see the status on TREX.But you can also see the service reported as inactive in the ‘Details’ tab,"BWA service restarted or inactive".	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_SERVICE_REST	BWA : No of services restarted	At each execution of the agent we check the "Start time" of each service in TREXADMIN. This kpi is the number of service restarted since the last execution. When the memory consumption of a blade exceed the limit, the blade might restart by itself. Whena blade restart all jobs and queries are killed so it has a major impact on users. With this indicator you can be alerted if a blade/service restarts to find the root cause of the restart.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_THRD_NO	BWA : Number of running threads for more than 10sec	If a blade is overloaded, the threads can slow down and number of long running threads will increase. This indicator can help you to detect when a blade is slowing down. Be aware that during cube indexing, index merging, it is normal to have long runningthreads.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_THRD_TIME	BWA : Runtime of longuest thread	This is the runtime of the longest running thread captured in TREXADMIN. This kpi can inform when there is a lock, a zombie thread. If it does not cause any lock, an oss message should be open to investigate. If rollup or changerun or master data SID update is locked and must be solved immediately, then a restart of index server and rfc server is required. See doc on alerts.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_1HOUR	1 HO
BWA_TTLMEM	BWA : Memory on most loaded blade (as percentage of total)	The speed of a BWA system is limited by the speed of the slowest blade. If you have 15 blades, it’s important that you have memory available on all the blades. And instead of recording individually the memory of each blade, we can record only a kpi for the worth performing blade. The memory of blade 1,2 and 3 are recorded as benchmark. The detailed for all the blades is saved in "Detail tab".This kpi is the max memory used of all blades calculated by TREXADMIN, FM TREX_EXT_LOAD_HISTORY since the last execution.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_TTLMEM_BL01	BWA : Memory on Blade 1	The most important kpi on memory is "BWA_TTLMEM BWA : Memory on most loaded blade (as percentage of total)". As it’s the most loaded blade, it will show different blade at different time. To see the trend on one blade, those kpi, memory on blade 1,2 and 3 are delivered.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_TTLMEM_BL02	BWA : Memory on Blade 2	The most important kpi on memory is "BWA_TTLMEM BWA : Memory on most loaded blade (as percentage of total)". As it’s the most loaded blade, it will show different blade at different time. To see the trend on one blade, those kpi, memory on blade 1,2 and 3 are delivered.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_TTLMEM_BL03	BWA : Memory on Blade 3	The most important kpi on memory is "BWA_TTLMEM BWA : Memory on most loaded blade (as percentage of total)". As it’s the most loaded blade, it will show different blade at different time. To see the trend on one blade, those kpi, memory on blade 1,2 and 3 are delivered.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_5MIN	5 MI
BWA_UNLOADS	BWA : Unloads (max per blade)	This is the highest unload per blade reported by TREXADMIN (FM 'TREX_EXT_LOAD_HISTORY from field of structure 'TREX_LOAD_UNLOAD_COUNT') in the last 5 minutes. When the value KPI increases rapidly, it could indicate problems with memory or BWA owerload in worst case. The reason of this problem could be low memory or too big indexes. The count of unloads couldn't be bigger than 200 unloads in the last 24 hours. SAP NOTE 1796356 could be heplful for depth analysis.	BWA	SYS	any server	Remote system	/DVD/MON_BWA_CL_COL_BWA	BWA_1HOUR	1 HO
CF_THRESHOLD	KPI with calculation function relative to threshold of KPI		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CA_CL_COL_CALC
CPU_IDLE	CPU true idle	Times in which the CPU had no task to perform or was waiting for an input/output.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
CPU_LOAD1	CPU - Average processes waiting (1 min)	The Average CPU Load (1, 5, and 15 minute averages) is the average number of processes that are ready for execution, but which must wait for the CPU. In SAP, you can see this indicator with OS07. If the average number of processes waiting is higher than the number of available CPUs,this indicates that the CPU is reducing the overall performance of the system. "CPU load %" is the CPU load divided by number of CPU available on the hardware. Values are capture for the database and for all applicationservers. The chart displays only the CPU of the database. There are many AS and CPU of AS is usually not an issue.But bad exec plan can increase dramatically CPU load of the DB.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
CPU_LOAD1_P	CPU - Average processes waiting (15 min)	The Average CPU Load (1, 5, and 15 minute averages) is the average number of processes that are ready for execution, but which must wait for the CPU. In SAP, you can see this indicator with OS07. If the average number of processes waiting is higher than the number of available CPUs,this indicates that the CPU is reducing the overall performance of the system. "CPU load %" is the CPU load divided by number of CPU available on the hardware. Values are capture for the database and for all applicationservers. The chart displays only the CPU of the database. There are many AS and CPU of AS is usually not an issue. But bad exec plan can increase dramatically CPU load of the DB.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
CPU_LOAD15	CPU - Average processes waiting (15 min) per CPU	The Average CPU Load (1, 5, and 15 minute averages) is the average number of processes that are ready for execution, but which must wait for the CPU. In SAP, you can see this indicator with OS07. If the average number of processes waiting is higher than the number of available CPUs,this indicates that the CPU is reducing the overall performance of the system. "CPU load %" is the CPU load divided by number of CPU available on the hardware. Values are capture for the database and for all applicationservers. The chart displays only the CPU of the database. There are many AS and CPU of AS is usually not an issue.But bad exec plan can increase dramatically CPU load of the DB.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN		15 MI
CPU_LOAD15_P	CPU - Average processes waiting (1 min) per CPU	The Average CPU Load (1, 5, and 15 minute averages) is the average number of processes that are ready for execution, but which must wait for the CPU. In SAP, you can see this indicator with OS07. If the average number of processes waiting is higher than the number of available CPUs,this indicates that the CPU is reducing the overall performance of the system."CPU load %" is the CPU load divided by number of CPU available on the hardware. Values are capture for the database and for all application servers. The chart displays only the CPU of the database. There are many AS and CPU of AS is usually not an issue. But bad exec plan can increase dramatically CPU load of the DB.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN		15 MI
CPU_LOAD5	CPU - Average processes waiting (5 min)	The Average CPU Load (1, 5, and 15 minute averages) is the average number of processes that are ready for execution, but which must wait for the CPU. In SAP, you can see this indicator with OS07. If the average number of processes waiting is higher than the number of available CPUs,this indicates that the CPU is reducing the overall performance of the system. "CPU load %" is the CPU load divided by number of CPU available on the hardware. Values are capture for the database and for all applicationservers. The chart displays only the CPU of the database. There are many AS and CPU of AS is usually not an issue.But bad exec plan can increase dramatically CPU load of the DB.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
CPU_LOAD5_P	CPU - Average processes waiting (5 min) per CPU	The Average CPU Load (1, 5, and 15 minute averages) is the average number of processes that are ready for execution, but which must wait for the CPU. In SAP, you can see this indicator with OS07. If the average number of processes waiting is higher than the number of available CPUs, this indicates that the CPU is reducing the overall performance of the system."CPU load %" is the CPU load divided by number of CPU available on the hardware. Values are capture for the database and for all applicationservers.The chart displays only the CPU of the database. There are many AS and CPU of AS is usually not an issue. But bad exec plan can increase dramatically CPU load of the DB.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
CPU_LOAD5_PMAX	CPU - Maximum average processes waiting (5 min) per CPU	CPU_LOAD5_PMAX is the maximum value of CPU load in 5 minute across all servers. The Average CPU Load (1, 5, and 15 minute averages) is the average number of processes that are ready for execution, but which must wait for the CPU. In SAP, you can see this indicator with OS07. If the average number of processes waiting is higher than the number of available CPUs, this indicates that the CPU is reducing the overall performance of the system."CPU load %" is the CPU load divided by number of CPU available on the hardware. Values are capture for the database and for all application servers.The chart displays only the CPU of the database.There are many AS and CPU of AS is usually not an issue.But bad exec plan can increase dramatically CPU load of the DB.	OS	SYS	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
CPU_NBR	Number of CPU's	The number of CPU's is displayed by this KPI.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1DAY	1 DA
CPU_SYS	CPU used by system	Percentage usage of CPU by user is diplayed by this KPI.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
CPU_USER	CPU used by user	CPU used by user is measured by KPI with name CPU_USER and suitable transaction for checking is ST06.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
CPU_WAIT	CPU IO wait	I/O wait "utilization" accrues when the CPU would be able to do some work, but all processes on the CPU are waiting for I/O responses. In SAP, you can see this indicator with OS07. Values are capture for the database and for all application servers.The chart displays only the worst value (usually IO wait of the database, IO wait on AS is usually zero).	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
CPU_WAIT_MAX	CPU IO wait (max. in all servers)	I/O wait "utilization" accrues when the CPU would be able to do some work,but all processes on the CPU are waiting for I/O responses. The value is calculated by CCMS, see transaction ST06. This KPI is max value of the "IO wait" for all monitored servers for this SID.	OS	SYS	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
CTS_AGE_OLDESTRQ	CTS - Age of the oldest request in queue	Age of the oldest transport request in queue.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_CTS	DEF_1DAY	1 DA
CTS_COUNT_REQNM	CTS - Number of requests not moving in queue	This KPI is number of transport request in import queue which are not imported (their state did not change) since the last snapshot (monitored run). Too many not imported transports could indicate problem with import queue or with automatic imports. If the value of this KPI decreases and indirectly correlates with some incident – it means that on the system were imported transports that affected given problem.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_CTS	DEF_1HOUR	1 HO
CTS_RC0008	CTS - Number of transport in RC8	Number of transport request with RC8.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_CTS	DEF_1DAY	1 DA
CTS_RC0008A	CTS - Number of transport in RC8 and above	Number of transport request with RC8 and above.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_CTS	DEF_1DAY	1 DA
CTS_RC0012A	CTS - Number of transport in RC12 and above	Number of transport request with RC12 and above.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_CTS	DEF_1DAY	1 DA
DB_CPU_LOAD5_P	DB CPU Load (avg 5 min) per CPU	The value is calculated by CCMS, see transaction ST06N, select the database. This KPI is the "cpu load avg 5 min" divided by the number of CPU.	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB_CPULOAD	DEF_5MIN	5 MI
DB_CRIT_TAB_SP_P	Free space on most critical data file (tablespace)	KPI displays percentage of free space that has most critical data file of database available. Most critical data file (table space) is chosen by size, so the biggest data file (table space) is critical file. For files that do not have maximum size set, size of logical device the file resides upon is used. Percentage is then calculated from this size.	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB	DEF_5MIN	5 MI
DB_FREE	Free size of database	KPI displays percentage of free space that has most critical data file of database available. Most critical data file (table space) is chosen by size, so the biggest data file (table space) is critical file. For files that do not have maximum size set, size of logical device the file resides upon is used. Percentage is then calculated from this size.	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB	DEF_1DAY	1 DA
DB_INDEX_NUM	Total number of indexes	This kpi contains informations about total number of indexes. An Index is a copy of database table having few numbers of fields. This copy is always in sorted form. As we know, Sorted data would always have a speed access from a database table. Hence, we use an index for the table while reading the database records. Index also contains a pointer pointing towards actual database table so that it can access fields that are not contained in the Index. There are two kinds of index for a database table:Primary Index, Secondary Index	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB	DEF_1DAY	1 DA
DB_INDEX_SIZE	Total size of indexes	This kpi describe, how total size can be acquire indexes. Transaction, which find out total size of indexes is : DBACOCKPIT -> SPACE -> SEGMENTS -> OVERVIEW -> TOP SIZES (and then filter on column type).	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB	DEF_1DAY	1 DA
DB_SIZE	Size of database	Database size contains : 1. number of records in tables 2. Table columns and their sizes 3. Indexes in the model 4. Tablespaces in the model 5. DBMS and its storage options All these factors affect size of database and total summary of these elements is processed this kpi.	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB	DEF_1DAY	1 DA
DB_TAB_NUM	Total numbers of tables	Each database has several tables. Table is one of basic database objects, which main role is storing data into memory space of relational database. This kpi measure how much tables contains database. Information about total numbers of tables contains transaction DB02.	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB	DEF_1DAY	1 DA
DB_TAB_SIZE	Total size of tables	The current table sizes are determined by a report and saved in a database table which forms the history of table sizes and table growth. Displaying the table size : 1. Open the Database Assistant 2. Choose Statistics --> Table Size This KPI displays actual value of size all tables.	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB	DEF_1DAY	1 DA
DB_USED	Used size of database	KPI of used DB size in MB. This KPI is calculated as total DB size minus DB free space available. Threshold values depend on DB system used and on company needs.	DB	SYS	any server	Remote system	/DVD/MON_CL_COL_DB	DEF_1DAY	1 DA
DELAY_LAST_RUN	Delay since last successful run	Measures the last successful run of the collector job. If some jobs are hanging, or running in a never ending loop, then the next collector will not be started. This KPI displays the time of the last successful completion of the collector job.	SAPSYS	SYS	any server	Central system		DEF_1MIN	1 MI
DEQ_ALL_REQ_CNT	Number of releases of all locks of an LUW	A database LUW is an inseparable sequence of database operations that ends with a database commit. The database LUW is either fully executed by the database system or not at all. Once a database LUW has been successfully executed, the database will be in a consistent state. If an error occurs within a database LUW, all of the database changes since the beginning of the database LUW are reversed. If you execute SAP transaction to change database objects, these objects get locked beforehand to prevent being accessed by other users or transactions, and they get released after database commit or database rollback - this KPI counts number of these releases.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
DEQ_ERROR_CNT	Number of errors that occurred when releasing locks	The database system automatically sets database locks when it receives change statements (INSERT, UPDATE, MODIFY, DELETE) from a program. Database locks are physical locks on the database entries affected by these statements. You can only set a lock for an existing database entry, since the lock mechanism uses a lock flag in the entry. These flags are automatically deleted in each database commit. Database locks are therefore never available longer than for only one database LUW. That means that in ABAP application programming, database locks can no longer exist than the duration of one dialog step. If there are some errors when releasing locks, this KPI counts the number of these errors.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
DEQ_REQUEST_CNT	Number of release requests (DEQUEUE)	A lock object definition contains the database tables and their key fields on the basis of which you want to set a lock. When you create a lock object, the system automatically generates two function modules with the names ENQUEUE_Name and DEQUEUE_Name. You can then set and release SAP locks in your ABAP program by calling these function modules in a CALL FUNCTION statement - this KPI counts the number of dequeue release requests. You can see lock statistics in SM12 Extras -> Statistics transtaction.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
DISK_AVG_WAIT	Average disk wait (server)	This KPI is the average disk wait on the server.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
DISK_RESPONS_SYS	Disk response time (server)	This KPI is average disk response time on all servers.	OS	SYS	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
DISK_RESPONSE	Average disk response time (all servers)	This KPI is disk response time on the server.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
DISK_UTIL	Disk utilization (server)	This KPI is disk utilization on the server.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
DISK_UTIL_SYS	Average disk utilization (all servers)	This KPI is disk utilization on all servers.	OS	SYS	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
DISK_WAIT_SYS	Average disk wait time (all servers)	This KPI is average disk wait time on all servers.	OS	SYS	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
DUMP_AUTH_ERR	Number of dumps on authorization failure	This KPI represent a count of dump which occurred by missing authorization	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_DUMP	DEF_1HOUR	1 HO
DUMP_DBIF	Number of dumps on SQL operations	This KPI represent a count of dump which occurred by SQL operations.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_DUMP	DEF_1HOUR	1 HO
DUMP_NBR	Number of dumps on a server	Number of dumps for all application servers as per ST22 from last monitoring time.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_DUMP	DEF_1DAY	1 DA
DUMP_NBR_SUM	Number of dumps (all servers)	Number of dumps on the SID since the last run of CanaryCode.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_DUMP	DEF_1DAY	1 DA
DUMP_SYNTAX_ERR	Number of dumps with syntax error	This KPI represent a count of dump which occurred by syntax errors.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_DUMP	DEF_1DAY	1 DA
EM_USED_P	Extended memory used	Extended Memory (EM) contains objects associated with individual users and their open (running) transactions - transaction data such as variables, lists, and internal tables. If the work process requires still more space after using up all available Extended Memory and Roll Area, the system is forced to allocate local Heap Memory. This KPI is the amount of Extended Memory used.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_BUFF	DEF_5MIN	5 MI
ENQ_ARG_MAX_CNT	Max.num. of diff. lock arguments that the LT can contain	The lock argument of a table in the lock object consists of the key fields of the table. The lock argument fields of a lock object are used as input parameters in the function modules for setting and removing locks generated from the lock object definition. When these function modules are called, the table rows to be locked or unlocked are specified by defining certain values in these fields. These values can also be generic. The lock argument fields define which subset of the table rows must be locked. This KPI is the maximal number of different lock arguments that can the Landscape Transformation (LT) possibly contain.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_ARG_MAX_LVL	Max.num. of diff. lock arg. stored simultaneously in the LT	The lock argument of a table in the lock object consists of the key fields of the table. The lock argument fields of a lock object are used as input parameters in the function modules for setting and removing locks generated from the lock object definition. When these function modules are called, the table rows to be locked or unlocked are specified by defining certain values in these fields. These values can also be generic. The lock argument fields define which subset of the table rows must be locked. This KPI is the maximal number of different lock arguments which are simultaneously stored in the Landscape Transformation (LT).	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_ARG_NOW_LVL	Current number of different lock arguments in the lock table	The lock argument of a table in the lock object consists of the key fields of the table. The lock argument fields of a lock object are used as input parameters in the function modules for setting and removing locks generated from the lock object definition. Lock table is a table in the main memory of the enqueue server that records the current locks in the system. For each elementary lock, the table specifies the owner, lock mode, name, and the fields in the locked table. The lock table is used to manage locks. Every time the enqueue server receives a lock request, the system checks the lock table to determine whether the request collides with an existing lock. If this is the case, the request is rejected. Otherwise, the new lock is written to the lock table. This KPI counts the number of all different lock arguments stored in this lock table.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_BACKUP_REQ	Number of update calls for which locks were forwarded	This KPI counts number of update calls for which locks were forwarded.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_CLEAN_REQ	Number of releases of all locks of an application server	Physical lock mechanisms in the database system are insufficient for the requirements of an ABAP transaction. The locks must remain set for the duration of a whole SAP LUW, that is, over several dialog steps. They must also be capable of being handled by different work processes and even different application servers. This KPI counts the number of all releases of all locks of a selected application server.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_COMPR_REQ	Compress Requests		SAPSYS	SYS	any serverr	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_ENTR_MAX_CNT	Max.num. of elementary locks that the LT can contain	Lock table is a table in the main memory of the enqueue server that records the current locks in the system. For each elementary lock, the table specifies the owner, lock mode, name, and the fields in the locked table. This KPI is the maximal number of elementary locks that can the Landscape Transformation (LT) possibly contain.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_ENTR_MAX_LVL	Max.num. of elementary locks stored simultaneously in the LT	Lock table is a table in the main memory of the enqueue server that records the current locks in the system. For each elementary lock, the table specifies the owner, lock mode, name, and the fields in the locked table. This KPI is the maximal number of elementary locks stored simultaneously in the Landscape Transformation (LT).	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_ENTR_NOW_LVL	Current number of elementary locks in the lock table	Lock table is a table in the main memory of the enqueue server that records the current locks in the system. For each elementary lock, the table specifies the owner, lock mode, name, and the fields in the locked table. This KPI is the current number of elementary locks stored in the lock table.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_ENTR_P	Usage of SAP lock table	The lock table is used to manage locks. Every time the enqueue server receives a lock request, the system checks the lock table to determine whether the request collides with an existing lock (see Lock Collisions). If this is the case, the request is rejected. Otherwise, the new lock is written to the lock table. This KPI is percentage of lock table usage.	SAPSYS	SYS	any server	Central system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_ERROR_CNT	Number of errors that occurred during lock requests	This KPI is number of errors that occurred during lock requests.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_FILE_WRITE	Number of write accesses to file	This KPI is number of write accesses to file.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_FILE_WRT_BCK	Number of write accesses to backup file	This KPI is number of write accesses to backup file.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_OWN_MAX_CNT	Max.num. of lock owner IDs that can be stored in the LT	Lock owner is a person who holds a lock. A lock can have one or two owners. This KPI is the maximal number of lock owner IDs that can be possibly stored in the Landscape Transformation (LT).	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_OWN_MAX_LVL	Max.num. of lock owners stored simultaneously in the LT	Lock owner is a person who holds a lock. A lock can have one or two owners. This KPI is the maximal number of lock owners that are simultaneously stored in the Landscape Transformation (LT).	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_OWN_NOW_LVL	Current number of lock owners in the lock table	Lock owner is a person who holds a lock. A lock can have one or two owners. To find out which user is currently holding a lock, use function module ENQUEUE_.... This KPI is the current number of all lock owners stored in the lock table.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_REPORT_REQ	Number of operations for reading the lock table	This KPI is number of operations for reading the lock table.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_REQ_REJ_CNT	Number of lock requests	This KPI is number of rejected lock requests.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_REQ_REJ_CNTD	Number of lock requests per minute since last run	This KPI is number of rejected lock requests per minute since last run.	SAPSYS	SYS	any server	Central system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_REQUEST_CNT	Number of rejected lock requests	Sm12 – statistics give the current value of ENQ processed.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_REQUEST_CNTD	Number of rejected lock requests per minute since last run	This KPI is the delta between the value of ENQ processed at last snapshot and the current value, divided by the number of minutes since the last snapshot to calculate a number of ENQ processed per minute. If we have high number of WP in SAPLSENA and number of ENQ per minute is high, the issue is that the application is raising too many ENQ. Solution is to find the root cause of high number of enq, can be too packets (eg. too many small packets) or too many requests in rsiccont. It is useful to monitor this number on paralell processes.	SAPSYS	SYS	any server	Central system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_TOT_SER_TIME	Total time spent in the critical path of the LT for lock op.	The enqueue server (also known as the lock server) is the SAP system component that manages the lock table. There is only one enqueue server in a distributed SAP system. The enqueue server receives a lock request and checks the lock table to determine whether the lock request collides with an existing lock. If it does, the enqueue server rejects it. If it does not collide, the enqueue server sets the lock and makes the entry in the lock table. This KPI is the total time spent in the enqueue server.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_TOTAL_TIME	Total wait time of par. proc. before entering critical path	This KPI counts total time spent in the critical path of the Landscape Transformation for lock operations.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_TOTAL_WAIT	Total time spent in the enqueue server	This KPI counts total wait time of parallel processing before entering critical path. Waiting time for all work processes for accesing lock table.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_UPD_MAX_CNT	Max.num. of open update req. with locks occurred so far	This KPI is maximal number of accumulated update requests.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_UPD_NOW_LVL	Current number of open update requests with locks	This KPI is current number outstanding update requests.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
ENQ_VERIFY_REQ	Verify Requests	Verify requests	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_ENQUEUE_STAT	DEF_5MIN	5 MI
FS_ROOT_FREE	Free space monitoring on root partiton	Free space monitoring on root partiton as % of whole space.	OS	SER	any server	Remote system	/DVD/MON_CL_COL_SYS_FS
GLUE_ERR_EXTR_NU M	Number of Glue extraction processes that ended up with an error	In Glue, every extraction process can have various status. Some are desired and some are not. Undesired means that they did not ended up successfully. There are 2 undesired statuses: "E" (Ended with error) and "F" (Failure, short-dump). This KPI informs the number of extraction processes which have an undesired status and provides details about them.	GLUE	SYS	any server	Remote system	/DVD/MON_GLU_CL_COL_EXTRACTION
GRC_AOC_BC_ALL	Number of SAP_BC roles having full auth. on org. level		GRC	SYS	only application server	Remote system	/DVD/MON_GRC_CL_COL_AUTH_OC	GRC_1DAY	1 DA
GRC_AOC_SEC_ALL	Number of SAP_SEC_ roles having full auth. on org. level		GRC	SYS	only application server	Remote system	/DVD/MON_GRC_CL_COL_AUTH_OC	GRC_1DAY	1 DA
GRC_AOC_ZCOM_ALL	Number of X,Y,Z* roles having full auth. on company code		GRC	SYS	only application server	Remote system	/DVD/MON_GRC_CL_COL_AUTH_OC	GRC_1DAY	1 DA
GRC_REF_USR_CNT	Number of used reference users		GRC	SYS	any server	Remote system	/DVD/MON_GRC_CL_COL_REF_USERS
GRC_SEC_NOTE_CNT	Number of not implemented security notes		GRC	SYS	any server	Remote system	/DVD/MON_GRC_CL_COL_SEC_NOTES
GRC_AUTH_ALL	Number of user with fill authorization (SAP_ALL, SAP_NEW)		SAPSYS	SYS	only application server	Remote system	/DVD/MON_GRC_CL_COL_USR_AUTH	GRC_1DAY	1 DA
GRC_AUTH_ALL_O_N	Number of NEW users with full authorization (SAP_ALL,SAP_NEW)		GRC	SYS	only application server	Remote system	/DVD/MON_GRC_CL_COL_USR_AUTH
GRC_PROF_PARAM	Num. of profile parameters with unexpected values	Collector checks values of profile parameters and compares it with values incollector’s input table. This procedure is performed for each server. KPI is the number of parameters which have different values from the values specified in input table.	GRC	SYS	only application server	Remote system	/DVD/MON_GRC_CL_COL_PARAM	DEF_1DAY	1 DA
HDB_BCK_DELAY_D	Time since last successful DATA backup	A backup, or the process of backing up, refers to the copying and archiving of data so it may be used to restore the original after a data loss event. Data backups contain the current payload of the data volumes (data and undo information).This KPI counts time since last successful DATA backup.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	5 MI
HDB_BCK_DELAY_L	Time since last successful LOG backup	By default, automatic log backups are enabled in SAP HANA. Backup log is a feature of backup applications that records the events that occur during a backup process. This KPI counts time since last succesful LOG backup.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	5 MI
HDB_BCK_FAILED	Number of failed backups	Media failure, human error and hardware failure are among the most common reasons backups fail. When the backup is performed with some errors, number of failed backups is recorded by this KPI.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	5 MI
HDB_CPU_HOST	CPU utilizaton per host (avg 5 mins)	The CPU utilization will always sum up to 100%. User utilization should not exceed a value of 50 to 60%. System utilization should be below 20%,and Idle time should be above 20%. The max CPU utilization is utilization of CPU the most of the possible. Maximal CPU utilization per host displays avg utilization counted every 5 minutes.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CPU_MAX_P	Max CPU utilizaton on all host (avg 5 mins)	The CPU utilization will always sum up to 100%. User utilization should not exceed a value of 50 to 60%. System utilization should be below 20%, and Idle time should be above 20%. The max CPU utilization is utilization of CPU the most of the possible. Maximal CPU utilization on all hosts is measured by this KPI. This KPI displays avg utilization counted every 5 minutes.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CPU_SYS_P	CPU utilization by system (avg 5 mins)	System utilization of CPU should be below 20%. System CPU time is the time spent running code in the operating system kernel on behalf of your program. When the value of system utilization rise up above 20%, it can signalize some failures. This KPI displays utilization of CPU by system counted every 5 minutes.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CPU_SYS_SER	CPU utilization by system per host (avg 5 mins)	System utilization of CPU should be below 20%. System CPU time is the time spent running code in the operating system kernel on behalf of your program. When the value of system utilization rise up above 20%, it can signalize some failures. CPU utilization by system per server is documented by KPI with name HDB_CPU_SYS_SER.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CPU_USR_P	CPU utilization by users (avg 5 mins)	User utilization should not exceed a value of 50 to 60%. User CPU time is time spent on the processor running program's code (or code in libraries). This KPI displays situation, when CPU is utilized by user. In this situation avg utilization is counted every 5 minutes.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CPU_USR_SER	CPU utilization by users per host (avg 5 mins)	User utilization should not exceed a value of 50 to 60%. User CPU time is time spent on the processor running your program's code (or code in libraries). When the CPU is utilized by users per server, this KPI counted utilization every 5 minutes.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CPU_UTIL_P	Total CPU utilization (avg 5 mins)	The CPU utilization will always sum up to 100%. User utilization should not exceed a value of 50 to 60%. System utilization should be below 20%,and Idle time should be above 20%. When CPU utilization is maximum, this progress try to record this KPI. Value of utilization is measured in 5 minutes intervals.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CPU_WIO_P	CPU utilization in I/O waits (avg 5 mins)	I/O wait is the total time that working processes are blocked, waiting for the I/O operation to complete. An I/O operation is a request to retrieve or write data to the storage. The total time that it takes to complete all I/O operations is I/O operation time. I/O wait happens due to heavy load on the system. This KPI show CPU utilization in I/O waits.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CPU_WIO_SER	CPU utilization in I/O waits per host (avg 5 mins)	I/O wait is the total time that working processes are blocked, waiting for the I/O operation to complete. An I/O operation is a request to retrieve or write data to the storage. The total time that it takes to complete all I/O operations is I/O operation time. I/O wait happens due to heavy load on the system. This KPI measures CPU utilization in I/O waits per server.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_CPU	HDB_5MIN	5 MI
HDB_CS_DELRATIO	Delta memory / Total memory ratio	Percentage of delta memory versus total memory used.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_DELTASIZE	Size of column tables in delta memory	Total size of column table data in delta memory.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_ESTIMSIZE	Size of column tables estimated	Estimated size of column tables in memory.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_H_ESTSIZE	Size of column tables estimated per host	Estimated size of column tables in memory, per host.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_H_TOTSIZE	Total memory size of column tables per host	Total memory size of column tables per host.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_MAINSIZE	Size of column tables in main memory	Under normal circumstances, the SAP HANA database manages the loading and unloading of tables into and from memory independently, the aim being to keep all relevant data in memory. However, you can manually load and unload individual tables, as well as load table columns if necessary. Size of column tables in main memory is captured by this KPI.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_TOTALSIZE	Total memory size of column tables	Total memory size of column tables.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_UNLOADS	Number of unloads	The UNLOAD statement unloads the column store table from memory. This can be done to free up memory. The table will be loaded again on next access.The UNLOAD statement unloads the column store table from memory. The whole amount of unloads we can see in KPI with name HDB_CS_UNLOADS.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_UNLOADS04	Number of unloads priority 0 to 4	Number of unloads with priority 0 to 4 displays this KPI. These are 9 priorities. Priority 0 to 4 is the most important of these all priorities.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_UNLOADS56	Number of unloads priority 5 to 6	This KPI shows number of unloads priority 5 to 6. These are 9 priorities. Priority 5 to 6 is in the middle of these priorities.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_UNLOADS79	Number of unloads priority 7 to 9	KPI with name HDB_CS_UNLOADS79 measures number of unloads priority 7 to 9. These are 9 priorities. This priority is the least important.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_CS_UNLOADSL	Number of unloads due to low memory		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB		5 MI
HDB_DISK_D_TOTAL	Used space on data disk per host	Used space on data disk per host, absolute value in GB	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_D_USED	Used space on data backup disk per host	Used space on data backup disk per host, absolute value in GB	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_DATA	Total size of data disks	Used space on log backup disk per host, absolute value in GB	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_DBCK	Total used size on data disks	Used space on log disk per host, absolute value in GB	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_L_TOTAL	Used space on log backup disk per host	Used space on log backup disk per host, absolute value in GB	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_L_USED	Used space on log disk per host	Used space on log disk per host, absolute value in GB	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_LBCK	Total size of log disks	?	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_LOG	Total used size on log disks	?	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_MAXDATA	Max. used space on data disks	?	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_MAXDBCK	Max. used space on data backup disks	Not displayed in charts	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_MAXLBCK	Max. used space on log backup disks	Not displayed in charts	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_MAXLOG	Max. used space on log disks	Total memory used by HANA database in GB	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DISK_MAXUSED	Max. used disk space	Percentage of allocated HANA memory used by database. Recommendation is max 50% of memory used for data and rest is reserved for calculation and intermediate results.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DISK	HDB_5MIN	5 MI
HDB_DM_COUNT	Number of small delta merge running for more than 60secs	This KPI monitors changes in .ini file contents. If there is a changed parameter since last monitoring run, it displays number of changes and related detail table shows list of changed parameters with OLD and NEW values	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DM	HDB_5MIN	5 MI
HDB_DM_MAXRUN	Max. duration of small delta merge	Savepoints in HANA database are responsible for synchronization of memory pages with disks, which is necessary for system recovery. The frequency of savepoints is defined using parameter global.ini -> [persistence] -> savepoint_interval_s. If this KPI exceeds the interval significantly, it means savepoint was not successful and there is a synchronization issue.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DM	HDB_5MIN	5 MI
HDB_DUMPS	Number of HANA dumps	Number of dump files written by HANA. Should be 0, if there are any files, it means there were out-of-memory situations or crashes. You can view dump files via HANA studio.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_DUMP	HDB_5MIN	5 MI
HDB_DUMPS_HOST	Number of HANA dumps per host	Number of dump files written by HANA. Should be 0, if there are any files, it means there were out-of-memory situations or crashes. You can view dump files via HANA studio.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_DUMP	HDB_5MIN	5 MI
HDB_FAILOVER	Number of hosts in failover status	Host auto-failover is a local fault recovery solution that can be used as a supplemental or alternative measure to system replication. One (or more) standby hosts are added to a SAP HANA system, and configured to work in standby mode. The databases on the standby hosts do not contain any data and do not accept requests or queries as long as they are in standby mode. See SAP Note 2057595 - FAQ: SAP HANA High Availability	HDB_HA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_HA	HDB_5MIN	5 MI
HDB_IO_MINREAD	Min. I/O data read speed	To achieve optimal database performance, I/O activity (read/write accesses) should be evenly distributed on the database's hard disks. The KPI HDB_IO_MINREAD describe minimal value of I/O data read speed.	HANA	SYS	only application server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_MINWRITE	Min. I/O data write speed	To achieve optimal database performance, I/O activity (read/write accesses) should be evenly distributed on the database's hard disks. The KPI HDB_IO_MINWRITE describe minimal value of I/O data write speed.	HANA	SYS	only application server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_RR_DATA	Max. DATA read ratio	I/O calls are executed asynchronously; that is the thread does not wait for the order to return. A ratio close to 0 says that the thread does not wait at all; a ratio close to 1 means that the thread waits until I/O request is completed because the asynchronous call is blocked (time for triggering I/O time for I/O completion). More information can be found in SAP Note 1930979. This KPI shows max DATA read ratio.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_SER_READ	I/O data read speed per host	To achieve optimal database performance, I/O activity (read/write accesses) should be evenly distributed on the database's hard disks. DATA read ratio per server is displayed by this KPI.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_SER_RR	DATA read ratio per host	I/O calls are executed asynchronously; that is the thread does not wait for the order to return. A ratio close to 0 says that the thread does not wait at all; a ratio close to 1 means that the thread waits until I/O request is completed because the asynchronous call is blocked (time for triggering I/O time for I/O completion). More information can be found in SAP Note 1930979. DATA read ratio per server is displayed by this KPI.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_SER_WLOG	LOG write ratio per host	I/O calls are executed asynchronously; that is the thread does not wait for the order to return. A ratio close to 0 says that the thread does not wait at all; a ratio close to 1 means that the thread waits until I/O request is completed because the asynchronous call is blocked (time for triggering I/O time for I/O completion). More information can be found in SAP Note 1930979. This KPI measures LOG write ratio per server.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_SER_WR	DATA write ratio per host	I/O calls are executed asynchronously; that is the thread does not wait for the order to return. A ratio close to 0 says that the thread does not wait at all; a ratio close to 1 means that the thread waits until I/O request is completed because the asynchronous call is blocked (time for triggering I/O time for I/O completion). More information can be found in SAP Note 1930979. DATA write ratio per server is captured by this KPI.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_SER_WRITE	I/O data write speed per host	I/O calls are executed asynchronously; that is the thread does not wait for the order to return. A ratio close to 0 says that the thread does not wait at all; a ratio close to 1 means that the thread waits until I/O request is completed because the asynchronous call is blocked (time for triggering I/O time for I/O completion). More information can be found in SAP Note 1930979. I/O data write speed server is collected by KPI with name HDB_IO_WR_DATA.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_WR_DATA	Max. DATA write ratio	I/O calls are executed asynchronously; that is the thread does not wait for the order to return. A ratio close to 0 says that the thread does not wait at all; a ratio close to 1 means that the thread waits until I/O request is completed because the asynchronous call is blocked (time for triggering I/O time for I/O completion). More information can be found in SAP Note 1930979. Maximal DATA write ratio is measured by this KPI.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_IO_WR_LOG	Max. LOG write ratio	I/O calls are executed asynchronously; that is the thread does not wait for the order to return. A ratio close to 0 says that the thread does not wait at all; a ratio close to 1 means that the thread waits until I/O request is completed because the asynchronous call is blocked (time for triggering I/O time for I/O completion). More information can be found in SAP Note 1930979. This KPI shows maximal LOQ write ratio.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_IO	HDB_5MIN	5 MI
HDB_BCK_FAIL_DAT	Number of failed DATA backups	When the DATA backup is performed with some errors, number of failed backups is recorded by this KPI. The KPI recognize two clasifications of failure on 'complete data backup' and 'data snapshot'	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	6 MI
HDB_BCK_FAIL_LOG	Number of failed LOG backups	When the LOG backup is performed with some errors, number of failed backups is recorded by this KPI. The KPI recognize two clasifications of failure on 'log backup' and 'log missing'	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	7 MI
HDB_LOG_BUFWAITP	Buffer switches with Wait on buffer semaphore % (max host)		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	5 MI
HDB_LOG_BUFWAITT	Number of Buffer switches wait since last check		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	5 MI
HDB_LOG_BUFWNOWT	Number of Buffer switches (noWait+wait) since last check		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	5 MI
HDB_LOG_SEG_FREE	Minimum number of Free log segments (per hosts)	This KPI shows the lowest value for all the nodes (it does not show the value for each node).If this KPI is 0 then the log backup will be delayed and may cause crash. If low, see content of table /DVD/MON_HDBLOGS in the satellite system to see on which node is the issue.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	5 MI
HDB_LOG_SEG_TRNC	Maximum number of Truncated log segments (per hosts)	This KPI shows the highest value for all the nodes (it does not show the value for each node) If high value, see content of table /DVD/MON_HDBLOGS to see on which node is the issue.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_BCK	HDB_5MIN	5 MI
HDB_MEM_ALLOCLIM	Global memory allocation limit for database	Not displayed in charts	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_CACHE_P	Memory used by caches per host	Percentage of host memory used by caches	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_CS_P	Memory used by column store per host	Percentage of host memory used by column store. If this component grows rapidly, consider housekeeping or archiving solutions. Check out DataVard OutBoard suite on www.datavard.com/outboard	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_HOST_P	Used physical memory per host	Physical memory is the main memory, the RAM. Unlike physical memory, virtual memory can be allocated by the SAP system. The operating system determines if the allocated memory area resides in the physical memory or in the operating system swap/page space. Percentage of utilization physical memory per host is displayed by this KPI.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_MAX_P	Maximum used physical memory on hosts	Physical memory is the main memory, the RAM. Unlike physical memory, virtual memory can be allocated by the SAP system. The operating system determines if the allocated memory area resides in the physical memory or in the operating system swap/page space. Maximum used physical memory around 94% is normal. This KPI says about maximal using of physical memory on all hosts.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_SQL_P	Memory used by SQL exec & results per host	Percentage of host memory used by SQL execution and intermediate results. If this area grows, it can indicate too expensive/inefficient SQL statements. Please check list of expensive SQL statements in DB02 transaction.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_SRVHOSTD	Percentage of used service memory per host – Delta	SAP HANA system consists of multiple services that all consume memory, in particular the index server service, the main database service. The index server holds all the data tables and temporary results, and therefore uses the most of SAP HANA used memory. This KPI displays the delta in percentage of used service memory per host.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_SRVHOSTP	Database memory used per host	Service used memory - an SAP HANA system consists of multiple services that all consume memory, in particular the index server service, the main database service. The index server holds all the data tables and temporary results, and therefore uses the most of SAP HANA used memory.This KPI displays the percentage of used service memory per host.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_SRVUSEDP	Maximum database memory used on hosts	This KPI calculates the % of max used memory on all hosts.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_STAT_P	Memory used by monitoring & statistics per host	Percentage of host memory used by monitoring and statistics server. In case of memory growth, please check SAP note 2147247 - FAQ: SAP HANA Statistics Server	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_SYS_P	Memory used by system per host	Percentage of host memory used by database system (not operating system!). If this component grows rapidly, it can be caused by a memory leak in HANA system and has to be fixed by HANA upgrade.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_TOTAL	Total physical memory on HANA available	Not displayed in charts	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_USED	Total physical memory used	Physical memory is the main memory, the RAM. Unlike physical memory, virtual memory can be allocated by the SAP system. The operating system determines if the allocated memory area resides in the physical memory or in the operating system swap/page space. Total using of physical memory is represented by this KPI.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_USED_DB	Total memory used by database	Total memory used by HANA database in GB	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MEM_USED_P	Total database memory used	Percentage of allocated HANA memory used by database. Recommendation is max 50% of memory used for data and rest is reserved for calculation and intermediate results.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MEM	HDB_5MIN	5 MI
HDB_MVCC_CL_FILE	Number of cleanup file	Each undo or cleanup file in the system is represented by one row in this view. Undo files contain information needed for transaction rollback. These files are removed on transaction end. If data is deleted but must still be accessible because of MVCC isolation, the corresponding information is written to cleanup files. On transaction end cleanup files are passed to history management. Garbage collection uses the cleanup files to finally remove data. Undo files and cleanup files may be cached and reused because of performance issues. Cached files get assigned the type "FREE". Undo files for row store get the type "EXTERNALUNDO"With this KPI we can be alerted earlier when the GC is not working. Also If number is high, restart will be slow as it has to delete all temp files.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MVCC	HDB_5MIN	5 MI
HDB_MVCC_MAXHOST	HDB MVCC max number of versions per host	Multiversion Concurrency Control(MVCC). The main advantage to using the MVCC model of concurrency control rather than locking is that in MVCC locks acquired for querying (reading) data do not conflict with locks acquired for writing data, and so reading never blocks writing and writing never blocks reading. This KPI shows maximal number of versions per host using MVCC.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_MVCC	HDB_5MIN	5 MI
HDB_NET_HOST_IN	HANA received via network - average per minute		HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_NET		5 MI
HDB_NET_HOST_INM	HANA received via network (max. minute avg. from all host)		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET		5 MI
HDB_NET_HOST_IP	HANA received via network – traffic peak		HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_NET		5 MI
HDB_NET_HOST_IPM	HANA received via network – traffic peak from all hosts		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET		5 MI
HDB_NET_HOST_OP	HANA sent via network – traffic peak		HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_NET		5 MI
HDB_NET_HOST_OPM	HANA sent via network – traffic peak from all hosts		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET		5 MI
HDB_NET_HOST_OUM	HANA sent via network (max. minute avg. from all host)		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET		5 MI
HDB_NET_HOST_OUT	HANA sent via network - average per minute		HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_NET		5 MI
HDB_NET_PING	HANA Network Client Duration - per host	The measured ping times include the communication between nameserver and indexserver and KPI collection within the indexserver. Increased times can be a symptom of an underlying performance issue. Check for general issues impacting the performance (e.g. resource bottlenecks).	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NET_RATIO	HANA Network Client Duration - max all hosts	Ratio between network time and total client+server time of a request. For example 30% means that in average the request spent 30% of the time on network transfer. If this value is high, it can indicate network bottlenecks. To enable this KPI, you need to set the HANA parameter: indexserver.ini -> [sql_client_network_io] -> enabled. See SAP Note 2222200 - FAQ: SAP HANA Network	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NET_SPEED	HANA Network Server Duration - per host	Average network throughput between HANA clients and servers To enable this KPI, you need to set the HANA parameter: indexserver.ini -> [sql_client_network_io] -> enabled. See SAP Note 2222200 - FAQ: SAP HANA Network	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NET_TRAFFIC	HANA Network Server Duration - max all hosts	Total amount of data transferred via network between HANA clients and servers in last 5 minutes To enable this KPI, you need to set the HANA parameter: indexserver.ini -> [sql_client_network_io] -> enabled. See SAP Note 2222200 - FAQ: SAP HANA Network	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NETCLI	HANA Network Service response time - per host	HANA Network Client Duration per host is displayed by this KPI.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NETCLIM	HANA Network Service response time - max all hosts	This KPI shows HANA Network Client Duration - max all hosts.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NETSER	Index server ping time per host	Server duration per host is measured by KPI with name HDB_NETSER.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NETSERM	Network I/O ratio	HANA Network Server Duration - max all hosts is displayed by this KPI.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NETSERVRESP	Network throughput	Service response time per host for HANA Network is captured by this KPI.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_NETSERVRESPM	Network traffic in last 5 minutes	This KPI shows HANA Network Service response time - max all hosts.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_NET	HDB_5MIN	5 MI
HDB_OLCK_AGE	Age of the oldest Object Lock	Locks are set on hana objects to guarantee data integrity. It can happen that a lock remains too long (due to bug or bad design) and this will impact users (waiting for lock to be removed) and operation (too many cleanup file, many threads…). Monitoring view M_OBJECT_LOCKS provides the status of currently acquired locks on objects with detailed information such as lock acquisition time, lock mode. The KPI HDB_OLCK_AGE "Age of the oldest Object Lock" is the oldest lock as shown by monitoring view M_OBJECT_LOCKS.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_OBJECTLOCK	HDB_5MIN	5 MI
HDB_OLCK_COUNTX	Number of Object Locks older than X minutes	Locks are set on hana objects to guarantee data integrity. It can happen that a lock remains too long (due to bug or bad design) and this will impact users (waiting for lock to be removed) and operation (too many cleanup file, many threads…). Monitoring view M_OBJECT_LOCKS provides the status of currently acquired locks on objects with detailed information such as lock acquisition time, lock mode. The KPI HDB_OLCK_COUNTX "Number of Object Locks older than X minutes" is the number of locks in monitoring view M_OBJECT_LOCKS that have acquisition time older than x minutes. X is customizable with collector parameter LOCK_COUNT_OLDER_X_MINUTES, by default 5 minutes. Number of object lock older than X minutes is displayed by KPI with name HDB_OLCK_COUNTX.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_OBJECTLOCK	HDB_5MIN	5 MI
HDB_PARAM_CH	Count of changed HANA parameters	This KPI monitors changes in .ini file contents. If there is a changed parameter since last monitoring run, it displays number of changes and related detail table shows list of changed parameters with OLD and NEW values	HANA	SYS	only application server	Remote system	/DVD/MON_HDB_CL_COL_PAR	HDB_5MIN	5 MI
HDB_PART_CNT_ABX	Number or partitions above XXX million rows		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_1DAY	1 DA
HDB_PCACHE_EVICD	SQL Plan Cache Eviction Delta max all host	It shows maximum change of plan eviction detected on all host for last snapshots.	HANA	SYS	any server	Central system	/DVD/MON_HDB_CL_COL_SQL_PLAN	HDB_5MIN	5 MI
HDB_PCACHE_EVICH	SQL Plan Cache Eviction per host	It shows how many times plan eviction occurred on a host. If plan cache eviction is too high, it means SQL plan cache capacity is not big enough and too many compilations occur.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_SQL_PLAN	HDB_5MIN	5 MI
HDB_PCACHE_EVIDH	SQL Plan Cache Eviction Delta per host	It shows change of plan eviction on a host in comparison with the last KPI snapshot.	HANA	SER	only database server	Central system	/DVD/MON_HDB_CL_COL_SQL_PLAN	HDB_5MIN	5 MI
HDB_PCACHE_HR_SR	SQL Plan Cache Hit Ratio per host	The hit ratio is the percentage of pages found in the cache without having to read from the disk. The ratio shows the average percentage of data pages found in the cache since SQL Server was started. This KPI displays SQL Plan Cache Hit Ratio per host.	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_SQL_PLAN	HDB_5MIN	5 MI
HDB_PLANCACHE_HR	Min. SQL Plan Cache Hit Ratio	The hit ratio is the percentage of pages found in the cache without having to read from the disk. The ratio shows the average percentage of data pages found in the cache since SQL Server was started. Minimal SQL Plan Cache Hit Ratio is measured by this KPI.	HANA	SYS	only application server	Remote system	/DVD/MON_HDB_CL_COL_SQL_PLAN	HDB_5MIN	5 MI
HDB_REP_DELAY	System replication: Log shipping delay	Log shipping delay occurred during the system replication from primary to secondary site. Check for errors or communication issues that can be responsible for the log shipping delays and make sure that log can be shipped in time. See SAP note 1999880 - FAQ: SAP HANA System Replication	HDB_HA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_HA	HDB_5MIN	5 MI
HDB_REP_ERROR	Number of system replication errors	There was an error during system replication between primary and secondary site. Analyze the related trace files in order to understand the reason for the problems and make sure that system replication is again established. See SAP note 1999880 - FAQ: SAP HANA System Replication	HDB_HA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_HA	HDB_5MIN	5 MI
HDB_REP_SS_AGE	Age of oldest replication snapshot	Database snapshots can increase the data disk space requirements and so you should make sure that system replication related snapshots are not kept longer than necessary. The snapshot retention time is controlled by the following parameter: global.ini -> [system_replication] -> datashipping_snapshot_max_retention_time See SAP note 1999880 - FAQ: SAP HANA System Replication	HDB_HA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_HA	HDB_5MIN	5 MI
HDB_REP_UNKNOWN	Number of unknown replication statuses	There was an error during system replication between primary and secondary site. Analyze the related trace files in order to understand the reason for the problems and make sure that system replication is again established. See SAP note 1999880 - FAQ: SAP HANA System Replication	HDB_HA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_HA	HDB_5MIN	5 MI
HDB_RS_ALLOC	Row store allocated size	This KPI shows row store allocated size.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_RS_FRAG	Row store fragmentation	Row store grows by allocating a 64MB memory segment and shrinks by freeing empty segments. A segment is internally divided into fixed-size pages. When a row store table requires more memory to store records, the table takes a free page from existing segments. If no segment has a free page, a new segment is allocated. Deleting a large number of records may result in a number of sparse segments. In such a case, row store reorganization can be performed for memory compaction. The pages in sparse segments are moved to other segments and the resultant empty segments are freed. If row store fragmentation exceeds 30%, row store reorganization is recommended. See SAP Note 1813245 - SAP HANA DB: Row store reorganization.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TAB	HDB_5MIN	5 MI
HDB_SP_COUNT	Number of savepoints	During a savepoint, the database system writes the data which has changed since the last savepoint from the data cache (working memory) to the data area (permanent storage). The data written during a savepoint always represents a consistent state of the database. During a savepoint the database system does not overwrite the pages written to the data area at the previous savepoint, but instead writes the changed data to free positions. This is because the database system requires this information from the previous savepoint for a restart if there is a system failure during the new savepoint. Only after the database system has successfully completed the new savepoint does it release the pages of the old savepoint in the data area for overwriting. This KPI shows number of savepoints.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_SP	HDB_5MIN	5 MI
HDB_SP_LAST	Time since last savepoint	Savepoints in HANA database are responsible for synchronization of memory pages with disks, which is necessary for system recovery. The frequency of savepoints is defined using parameter global.ini -> [persistence] -> savepoint_interval_s. If this KPI exceeds the interval significantly, it means savepoint was not successful and there is a synchronization issue.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_SP	HDB_5MIN	5 MI
HDB_SP_MAXRUN	Max. duration of a savepoint	During a savepoint, the database system writes the data which has changed since the last savepoint from the data cache (working memory) to the data area (permanent storage). The data written during a savepoint always represents a consistent state of the database. During a savepoint the database system does not overwrite the pages written to the data area at the previous savepoint, but instead writes the changed data to free positions. This is because the database system requires this information from the previous savepoint for a restart if there is a system failure during the new savepoint. Only after the database system has successfully completed the new savepoint does itrelease the pages of the old savepoint in the data area for overwriting. This KPI shows maximal duration of savepoint.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_SP	HDB_5MIN	5 MI
HDB_SP_MAXRUN_C	Max. critical phase duration of a savepoint	During a savepoint, the database system writes the data which has changed since the last savepoint from the data cache (working memory) to the data area (permanent storage). The data written during a savepoint always represents a consistent state of the database. During a savepoint the database system does not overwrite the pages written to the data area at the previous savepoint, but instead writes the changed data to free positions. This is because the database system requires this information from the previous savepoint for a restart if there is a system failure during the new savepoint. Only after the database system has successfully completed the new savepoint does it release the pages of the old savepoint in the data area for overwriting. To perform a savepoint write operation, SAP HANA needs to take a global database lock. This period is called the “critical phase” of a savepoint. The max. critical phase duration of a savepoint is displayed by this KPI.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_SP	HDB_5MIN	5 MI
HDB_SP_SPEED	Savepoint speed	During a savepoint, the database system writes the data which has changed since the last savepoint from the data cache (working memory) to the data area (permanent storage). The data written during a savepoint always represents a consistent state of the database. During a savepoint the database system does not overwrite the pages written to the data area at the previous savepoint, but instead writes the changed data to free positions. This is because the database system requires this information from the previous savepoint for a restart if there is a system failure during the new savepoint. Only after the database system has successfully completed the new savepoint does it release the pages of the old savepoint in the data area for overwriting. This KPI shows savepoint speed.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_SP	HDB_5MIN	5 MI
HDB_SQL_EXP_STMT_NUM	Number of expensive statements exceeding the memory limit	Expensive statements are individual SQL statements whose peak memory size exceeds a configured threshold during their execution. The threshold is configured as collector's parameter MEMORY_SIZE_LIMIT_IN_MB with the default value 500MB. The KPI represents a number of expensive SQL statements which are recognized from the last monitoring snapshot. The SQL statement is stored in the Detail table "HANA expensive statements" with additional information as are which application or user executed it, how long it was running and maximum memory consumed by the execution.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_SQL_STMT	HDB_5MIN	5 MI
HDB_SRV_RESTART	Number of restarted index services	Restart of an index server can indicate a node failover or another crash situation.	HDB_HA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_HA	HDB_5MIN	5 MI
HDB_THR_BACKUP	Max. duration of Backup threads	A backup, or the process of backing up, refers to the copying and archiving of data so it may be used to restore the original after a data loss event. Maximum duration of backup threads are displayed by KPI is called HDB_THR_BACKUP.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_COUNT	Number of active HANA threads	The SAP NetWeaver Application Server provides logical services for processing the workload mapped through operation system processes.These include the dispatcher and work processes of the ABAP server, which are each implemented on UNIX derivatives as separate operating system processes and on Windows operating systems through what are known as threads within a process. The active threads, which exists in HANA are monitored by KPI with name HDB_THR_COUNT.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_JOBWRUN	Thread JobWorker Running max all hosts		HANA	SYS	any server	Central system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_JOBWRUNH	Thread JobWorker Running per host		HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_JOBWTTL	Thread JobWorker Total max all hosts		HANA	SYS	any server	Central system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_JOBWTTLH	Thread JobWorker Total per host		HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_LOCKED	Number of threads waiting for locks	Number of threads waiting for various types of locks. If there are long running locks, please find the lock type in the detail table with threads and check SAP Note 1999998 - FAQ: SAP HANA Lock Analysis	HANA	SYS		Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_MAXRUN	Max. duration of HANA threads	Maximum duration of all running HANA threads.	HANA	SYS		Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_MC_CPUT	MemoryCompactor CPU Time (ratio per sec) Max all host	KPI HDB_THR_MC_CPUT is a maximum ratio between the delta CPU time of the thread and number of seconds between 2 snapshots on each host. It’s a number of parallel threads that are processed by MemoryCompactor (also called incorrectly Garbage Collector). When “defragmentation” / thread MemoryCompactor is running, ERP is slow and can be extremely slow as defragmentation requires a IPMM lock (it can create locks on NRIV or other critical tables).	HANA	SYS		Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_MC_CPUTH	MemoryCompactor CPU Time (ratio per sec) per host	HDB_THR_MC_CPUTH is a ratio between the delta CPU time of the thread and number of seconds between 2 snapshots on each host. It’s a number of parallel threads that are processed by MemoryCompactor (also called incorrectly Garbage Collector). When “defragmentation” / thread MemoryCompactor is running, ERP is slow and can be extremely slow as defragmentation requires a IPMM lock (it can create locks on NRIV or other critical tables).	HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_MERGEDOG	Max. duration of MergeDog threads	A system process called “MergeDog” periodically checks the to the storage server and for which auto merge is enabled. It then determines for each individual table (or single partition of a split storage) if a merge should be executed based on configurable criteria. This KPI shows maximal duration of MergeDog threads.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_REPLICA	Maximum runtime of replications	This is the time taken for replicating the data from primary site to secondary. Long time of replication is always after the back up. So, it can be co-related with the KPI Max duration of backup thread.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_SQLEC1	Thread SqlExecutor Count Running > 1minute		HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_SQLERUN	Thread SqlExecutor Running max all hosts		HANA	SYS	any server	Central sustem	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_SQLERUNH	Thread SqlExecutor Running per host		HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_SQLETTL	Thread SqlExecutor Total max all hosts		HANA	SYS	any server	Central system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_SQLETTLH	Thread SqlExecutor Total per host		HANA	SER	only database server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_SQLRUN	Max. duration of SqlExecutor threads	These thread types handle incoming client requests and execute simple statements. For each statement execution, an SqlExecutor thread from a thread pool processes the statement. For simple (OLTP-like) statements against column store as well as for most statements against row store, this will be the only type of thread involved. This KPI shows maximal duration of SqlExecutor threads.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_THR_TIME_CAP	Time to capture threads	Runtime to read all thread data from HANA monitoring view	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_THREAD	HDB_5MIN	5 MI
HDB_TRAN_BLOCK_C	Number of blocked transactions	Blocked transactions are transactions that are unable to be processed further, because they need to acquire transactional locks (record or table locks) ,that are currently held by another transaction. Transactions can also be blocked waiting for other resources such as network or disk (database or metadata locks). You can lock and unlock transaction codes in SM01. This KPI shows number of blocked transactions.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TRAN	HDB_5MIN	5 MI
HDB_TRAN_BLOCK_T	Duration of longest transaction lock wait	Some transactions are waiting too long for a DB lock, most probably some long-running program didn't release a lock using DB commit and blocks other transactions.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TRAN	HDB_5MIN	5 MI
HDB_TRAN_REDO	Maximum redo size of current transaction	To enable point-in-time recovery for the database system, the DB writer REDO logs after every COMMIT. These logs are used to reply changes recorded since last full backup. Check if you can reduce the amount of performed change operations.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TRAN	HDB_5MIN	5 MI
HDB_TRAN_UNDO	Maximum undo size of current transaction	Every transaction which changes data writes UNDO logs, which are used in case of process termination to rollback the changes. After the DB commit, the UNDO log is deleted. If this size is growing too much, it means there is changes are not commited often enough. Check if you can reduce the amount of performed change operations or if you can increase the COMMIT frequency in order to split the change load into several smaller pieces.	HANA	SYS	any server	Remote system	/DVD/MON_HDB_CL_COL_TRAN	HDB_5MIN	5 MI
HMBS_A_HK	HeatMap: Analysis Profile - Dummy KPI	Execution of Housekeeping analysis on satellite system	HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMBS_A_HK
HMBS_A_TTB (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMBS_A_TTB
HMBS_E_HK	HeatMap: ETL Profile - Dummy KPI	Housekeeping analysis extraction of analyzed data from satellite system	HMCCAE	SYS	any server	Central system	/DVD/HMCC_CL_COL_RL_ETL	HMBS_E_HK
HMBS_E_RAL	HeatMap: ETL Profile - Dummy KPI		HMCCAE	SYS	any server	Central system	/DVD/HMCC_CL_COL_RL_ETL	HMBS_E_RAL
HMBS_E_SS	HeatMap: ETL Profile - Dummy KPI	System size KPI	HMCCAE	SYS	any server	Central system	/DVD/HMCC_CL_COL_RL_ETL	HMBS_E_SS
HMBS_S_STD	HeatMap: ETL Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMBS_COL_STAD	HMBS_S_STD	10 MI
HMBW_DTP_QR_RECORD	Heatmap data for DTP and Query collected records	Collection of DTP and query usage analysis on central system	HMBW	SYS	any server	Central system	/DVD/MON_HM_CL_COL_DTP_QR	HMBW_1DAY
HMBW_DTP_QR_RECORD_R	Heatmap data for DTP and Query collected records - remote	Extraction of data for DTP and query usage analysis on central system	HMBW	SYS	any server	Remote system	/DVD/MON_HM_CL_COL_DTP_QR	HMBW_1DAY
HMBW_DU_RECORD	HMBW Data Usage collected records	Collection and aggregation of Data distribution analysis data on central system	HMBW	SYS	any server	Central system	/DVD/MON_HM_CL_COL_DU	HMBW_1DAY
HMBW_DU_RECORD_R	HMBW Data Usage collected - remote	Execution and collection of Data distribution analysis data on satellite system	HMBW	SYS	any server	Remote system	/DVD/MON_HM_CL_COL_DU	HMBW_1DAY
HMBW_QU_RECORD	HMBW QueryUsage collected records	Collection and aggrregation of query usage analysis data on central system	HMBW	SYS	any server	Central system	/DVD/MON_HM_CL_COL_QU	HMBW_1DAY	1 DA
HMBW_QU_RECORD_R	HMBW Query Usage collected - remote	Execution and collection of query usage analysis data on satellite system	HMBW	SYS	any server	Remote system	/DVD/MON_HM_CL_COL_QU	HMBW_1DAY	1 DA
HMCC_A	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL
HMCC_E	HeatMap: ETL Profile - Dummy KPI		HMCCAE	SYS	any server	Central system	/DVD/HMCC_CL_COL_RL_ETL
HMER_A_ACH (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMER_A_ACH
HMER_A_ACO (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMER_A_ACO
HMER_A_AEC (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMER_A_AEC
HMER_A_AFI (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMER_A_AFI
HMER_A_ALE (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMER_A_ALE
HMER_A_AMM (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMER_A_AMM
HMER_A_ASD (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMER_A_ASD
HMER_A_UEG (OBSOLETE)	HeatMap: Analysis Profile - Dummy KPI		HMCCAE	SYS	any server	Remote system	/DVD/HMCC_CL_COL_RL_ANL	HMER_A_UEG
HMER_C_CCL (OBSOLETE)	HeatMap: Central Collector - Dummy KPI		HMCCAE	SYS	any server	Central system	/DVD/EHMC_CL_COL_CCLDR	HMER_C_CCL
IDOC_I_PROC_AVG	Total count of inbound IDocs for last snapshot		IDOC	SYS	only application server	Remote system	/DVD/MON_IDOC_CL_COL_EDIDC	IDOC_1HOUR	1 HO
IDOC_IN_ERRORS	Number of Errors in Inbound iDocs Processing	List of iDoc Inbound statuses which indicates error and are counted to KPI: 51 Posting error 52 Posting error 54 Error during formal application check 56 IDOC with error added 60 Syntax error 61 Processing despite syntax error 63 Error passing IDOC to application 65 ALE error	IDOC	SYS	any server	Remote system	/DVD/MON_IDOC_CL_COL_EDIDC	IDOC_1HOUR	1 HO
IDOC_INBOUND_C	Average time of successfull inbound IDoc processing (50-53)		IDOC	SYS	only application server	Remote system	/DVD/MON_IDOC_CL_COL_EDIDC	IDOC_1HOUR	1 HO
IDOC_O_PROC_AVG	Total count of outbound IDocs for last snapshot		IDOC	SYS	only application server	Remote system	/DVD/MON_IDOC_CL_COL_EDIDC	IDOC_1HOUR	1 HO
IDOC_O_TRANS_AVG	Nummber of Errors in Outbound iDocs processing		IDOC	SYS	only application server	Remote system	/DVD/MON_IDOC_CL_COL_EDIDC	IDOC_1HOUR	1 HO
IDOC_OUT_ERRORS	Average time of successfull outbound IDoc processing (01-30)	List of Outbound iDoc statuses which indicate error and are counted to KPI: 02 Error passing data to port 04 Control information of EDI subsystem 05 Translation 07 Syntax check 09 Interchange handling 11 Dispatch 15 Interchange acknowledgement negative 17 Functional acknowledgement negative 20 Triggering EDI subsystem 23 Retransmission 25 Processing despite syntax error 27 ALE error 34 Error in control record of IDOC 36 Timeout error; electronic signature not performed 37 IDOC added incorrectly 40 Application document not created in target system	IDOC	SYS	any server	Remote system	/DVD/MON_IDOC_CL_COL_EDIDC	IDOC_1HOUR	1 HO
IDOC_OUTBOUND_C	Average time of successful transmission (03->12)		IDOC	SYS	only application server	Remote system	/DVD/MON_IDOC_CL_COL_EDIDC	IDOC_1HOUR	1 HO
LAN_ERROR_IN	Network errors In	This KPI counts the number of network errors In.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
LAN_ERROR_OUT	Network errors Out	This KPI counts the number of network errors Out.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
LAN_PACKETS_IN	Network packets In	This KPI counts the number of network packets In.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
LAN_PACKETS_OUT	Network packets Out	This KPI counts the number of network packets Out.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
MEM_FREE	Memory free (server)	This KPI is free memory on the server.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
MEM_FREE_SUM	Total free memory in system (all servers)	This KPI is total free memory in system on all servers.	OS	SYS	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
MEM_PHYS	Physical memory available (server)	This KPI is available physical memory on the server.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1DAY	1 DA
MEM_USED_P	Memory used (server)	This KPI is used memory on the server.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
PAGE_IN	Kb paged in/s	Page IN from memory per hour.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
PAGE_IN_P	Page IN from memory per hour	The memory utilization statistics are important to ensure that system performance is running smoothly. This KPI displays the number of pages in per hour.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
PAGE_OUT	Kb paged out/s	When not null, it indicates that system is swapping. CCMS calculates page out in kb by sec. The value is converted per hour (multiplied by 3600) then divided by total physical memory available on the hardware to calculate the value in percentage.Valuesare capture for the database and for all application servers. However the chart will display only the worst value. You can see page out in kb per sec in SAP with OS07.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
PAGE_OUT_P	Page OUT from memory per hour	The memory utilization statistics are important to ensure that system performance is running smoothly. This KPI displays the number of pages out per hour.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
PARAM_CHANGED	Number of changed system profile parameters		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_PARAM	DEF_1DAY	1 DA
RFC_CIF_IN_15	tRFCqIN number of entries Queue CIF older than 15minutes	During the transfer of data between two SAP systems, errors can occur that lead to faulty queue entries. Faulty queue entries need to be rectified as soon as possible, before they lead to serialization effects. To do this, you have to be able to display the contents of the queues in such a way that the object that caused the error can be determined as quickly as possible and any necessary changes can be made. CIF queue display enables you to do this. tRFCqIN is a standard SAP Table which is used to store tRFC Queue Description (Inbound Queue) information. The relevant SAP transaction for viewing this information is SE11 or SE80. The viewing data contained in this database table via these transactions or alternatively use transaction SE16. This KPI shows tRFCqIN number of entries Queue CIF older than 15 minutes.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_RFCQ	DEF_1HOUR	1 HO
RFC_CIF_OUT_15	tRFCqOUT number of entries Queue CIF older than 15minutes	During the transfer of data between two SAP systems, errors can occur that lead to faulty queue entries. Faulty queue entries need to be rectified as soon as possible, before they lead to serialization effects. To do this, you have to be able to display the contents of the queues in such a way that the object that caused the error can be determined as quickly as possible and any necessary changes can be made. CIF queue display enables you to do this. tRFCqOUT is a standard SAP Table which is used to store tRFC Queue Description (Outbound Queue) information. The relevant SAP transaction for viewing this information is SE11 or SE80. The viewing data contained in this database table via these transactions or alternatively use transaction SE16. This KPI shows tRFCqOUT number of entries Queue CIF older than 15 minutes.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_RFCQ	DEF_1HOUR	1 HO
RFC_IN_AUTHERR	Number of failed RFC tests - RFC check with authorisation		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_RFC		1 HO
RFC_IN_CON_ERR	Number of failed RFC tests - RFC check without authorisation		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_RFC		1 HO
RFC_IN_PINGERR	Number of failed RFC tests - ping server IP		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_RFC		1 HO
ROLL_USED_P	Roll area used	In the Roll area is stored the user context data, such as user authorizations, Set/Get parameters, pointers to active programs and defaults. The remaining portion of the roll area is used when the system can no longer allocate Extended Memory, either because Extended Memory is full or because the user quota has been reached. This KPI is the amount of Roll area used.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_BUFF	DEF_5MIN	5 MI
SERVER_IS_DOWN	Server is down (true = 1 / false = 0 )	Checks the accessibility of a SAP instance running on the server. Value 1 means that SAP instance was checked through RFC and is not accessible on the server. Value 0 means that SAP instance is accessible and running on the server. This KPI isn't assigned to a collector, as it is hardcoded in Datavard Insights.	OS	SER	any server	Central system		DEF_1MIN	1 MI
SERVER_RFC_FAIL	Server unreachable via RFC (true = 1 / false = 0)	This KPI is similar to the SERVER_IS_DOWN KPI, but it checks the server accessibility from the OS level perspective. It tries to ping a server directly and checks, if it is reachable. Value 1 means that server cannot be reached. Value 0 means that server is reachable. This KPI isn't assigned a collector, as it is hardcoded in Datavard Insights.	SAPSYS	SER	any server	Central system		DEF_1MIN	1 MI
SLG_DEBUG	Number of changes in debug mode		GRC	SYS	any server	Remote system	/DVD/MON_GRC_CL_COL_SYSLOG	DEF_1HOUR	1 HO
SLG_KERNEL	Number of activated C-calls debuging		GRC	SYS	any server	Remote system	/DVD/MON_GRC_CL_COL_SYSLOG	DEF_1HOUR	1 HO
STAT_DIALOG_AVG	Average System Response Time for Users	Average time between the time at which a dialog process sends a request to a dispatcher work process,and the time at which the dialog is complete and the data is transferred to the presentation layer.The response time does not include the time for transferring the data from the SAP front end to the application server. Networks with bad performance can therefore have larger subjective response times. The transfer time is included in the GUI time and the front end network time.Average system response time is usually time around 1 second(dialog) < 1 second (update). This KPI shows this time, which is adequate for users.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_5MIN	5 MI
STAT_DIALOG_TOT	Total System Response Time for Users	The response time of a transaction step is the difference between the time when the request arrives in the R/3 system and the time when processing in the R/3 system is complete. Total system response time for users is measured by this KPI.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_5MIN	5 MI
STAT_M_RESP_BC	[BC] Response time from Basis Components	The SAP BC (Basis Components) is the root of the SAP Applications ERP software. It provides the runtime environment for the rest of the R/3 Applications. It ensures that applications are optimally integrated in the system environment. The SAP Basis Components contains powerful tools such as CCMS (Computing Center Management System) for easy system administration. Response time from Basis Components is measured by this KPI.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_1HOUR	1 HO
STAT_M_RESP_BW	[BW] Response time from SAP Business Inf. Warehouse	As a core component of SAP NetWeaver, the SAP Business Information Warehouse (SAP BW) provides data warehousing functionality, a business intelligence platform, and a suite of business intelligence tools that enable businesses to attain these goals. Relevant business information from productive SAP applications and all external data sources can be integrated, transformed,and consolidated in SAP BW with the toolset provided. SAP BW provides flexible reporting and analysis tools to support you in evaluating and interpreting data, as well as facilitating its distribution. Businesses are able to make well-founded decisions and determine target-orientated activities on the basis of this analysis. This KPI shows response time from SAP Business Inf. Warehouse.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_1HOUR	1 HO
STAT_M_RESP_XXXX	Total response time from undefined components	The response time of a transaction step is the difference between the time when the request arrives in the R/3 system and the time when processing in the R/3 system is complete.This KPI shows total response time from components, which are undefined.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_1HOUR	1 HO
STAT_M_TCNT_BC	[BC] Number of trans. from Basis Components	The SAP BC (Basis Components) is the root of the SAP Applications ERP software. It provides the runtime environment for the rest of the R/3 Applications. It ensures that applications are optimally integrated in the system environment. The SAP Basis Components contains powerful tools such as CCMS (Computing Center Management System) for easy system administration. Number of trans. from Basis Components is processed by this KPI.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_1HOUR	1 HO
STAT_M_TCNT_BW	[BW] Number of trans. from SAP Business Inf. Warehouse	As a core component of SAP NetWeaver, the SAP Business Information Warehouse (SAP BW) provides data warehousing functionality, a business intelligence platform, and a suite of business intelligence tools that enable businesses to attain these goals. Relevant business information from productive SAP applications and all external data sources can be integrated, transformed, and consolidated in SAP BW with the toolset provided. SAP BW provides flexible reporting and analysis tools to support you in evaluating and interpreting data, as well as facilitating its distribution. Businesses are able to make well-founded decisions and determine target-orientated activities on the basis of this analysis. Number of trans. from SAP Business Inf. Warehouse is proceseed by this KPI.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_1HOUR	1 HO
STAT_M_TCNT_XXXX	Number of transaction from undefined components	Number of transaction from undefined components is displayed by this KPI.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_1HOUR	1 HO
STAT_RSA1_AVG	Average runtime of RSA1	RSA1 - Modeling - DW Workbench. Average runtime of RSA1 is displayed by this KPI.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_5MIN	5 MI
STAT_SE16_AVG	Average Response Time of Transaction SE16	SE16 - Data Browser. Average response time of transaction is processed by KPI with name STAT_SE16_AVG.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_5MIN	5 MI
STAT_SE16_CNT	Number of SE16 Transaction starts	SE16 - Data Browser. Number of SE16 Transaction starts is displayed by this KPI.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_5MIN	5 MI
STAT_SE16_TTL	Response Time of Transaction SE16	SE16 - Data Browser. This KPI shows response time of transaction SE16.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_5MIN	5 MI
STAT_SE38_RESP	Response Time of Transaction SE38	SE38 -ABAP Editor. This KPI shows response time of transaction SE38.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_5MIN	5 MI
STAT_SE38_RUN	Average Runtime of reports running via SE38	SE38 -ABAP Editor. Average Runtime of reports running via transaction SE38.	STAT	SYS	any server	Remote system	/DVD/MON_STAT_CL_COL_MODULES	STAT_5MIN	5 MI
SWAP_CONF	Swap configured	This KPI is amount of configured swap space.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1DAY	1 DA
SWAP_DELTA	Delta between previous and current used swap	This is the difference between 2 snapshots of Free Swap in percentage of total swap. This is more accurate that "Page Out %" which is a snapshot when FM runs.It’s possible that the system was paging 1 minute before the FM runs and page out returns 0.But it takes some time to recover from paging and delta swap will show a value. 0.5% of delta swap is already too much.	OS	SER	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
SWAP_DELTA_P	Delta between previous and current used swap	This is the difference between 2 snapshots of used swap in percentage of total swap. This is more accurate that "Page Out %" which is a snapshot when collector runs.It’s possible that the system was paging 1 minute before the collector runs and page out returns 0.But it takes some time to recover from paging and delta swap will show a value.	OS	SER	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
SWAP_DELTA_PMAX	Delta between swap (max all servers)	Swap used is calculated by CCMS, see transaction ST06N. This KPI is the delta of the swap used between the last 2 snapshots,calculated in percentage of swap area.	OS	SYS	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_1MIN	1 MI
SWAP_FREE	Free swap space	Free Swap in percentage of total swap. When it reach zero, the instance is dead.When going down it means the system is swapping.But swap are more accurate in indicator "Page Out %", as free swap is a HWM. Values are captured for all servers (AS and BD), the minimum value is displayed in the chart.You can see this with OS07.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
SWAP_USED	Used swap space	This KPI is amount of used swap space - in kB.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
SWAP_USED_P	Used swap space	KPI calculates percentages of used swap space by substituting actual value SWAP_FREE from SWAP_CONF.	OS	SER	only application server	Remote system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
SWAP_USED_PMAX	Used swap (max all servers)	Swap used is calculated by CCMS, see transaction ST06N. This KPI is the max swap used in percentage of swap area for all servers monitored for this SID.	OS	SYS	only application server	Central system	/DVD/MON_CL_COL_MEM_CPU_LAN	DEF_5MIN	5 MI
SYSTEM_IS_DOWN	System is not responding (true = 1 / false = 0 )	Special KPI hardcoded in Canarycode ie without collector, value 1 if SID is not responding (rfc call not possible to satellite system). Can be used for alerting.	SAPSYS	SYS	any server	Central system		DEF_1MIN	1 MI
UPD_REQ_CANCEL	Update requests cancelled	An update request, or update record, describes the data changes determined in an SAP LUW. These changes should be made completely, or not all (this means, in a database LUW). This refers only to V1 updates. V2 updates are triggered once the V1 update is complete and are processed in a separate database LUW. An update request is identified by its update key. An update request consists of an update header, V1 modules (or components), V2 module and a collective run module. When the update requests are canceleled, this situation is displayed by this KPI.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_UPD_REQ	DEF_1HOUR	1 HO
UPD_REQ_TOBEUPD	Update requests to be updated	An update request, or update record, describes the data changes determined in an SAP LUW. These changes should be made completely, or not all (this means, in a database LUW). This refers only to V1 updates. V2 updates are triggered once the V1 update is complete, and are processed in a separate database LUW. An update request is identified by its update key. An update request consists of an update header, V1 modules(or components), V2 module and collective run module. This KPI shows situation, when update requests to be updated.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_UPD_REQ	DEF_1HOUR	1 HO
USER_CNT	Number of active users	This KPI is number of active users.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_USER_INFO	DEF_5MIN	5 MI
USER_CNT_SER	Number of active users (server)		SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_USER_INFO	DEF_5MIN	5 MI
USER_EXT_MOD	Number of external modes	This KPI is number of external modes.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_USER_INFO	DEF_5MIN	5 MI
USER_EXT_MOD_SER	Number of external modes(server)		SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_USER_INFO
USER_GUI_CNT	Number of interactive users	This KPI is number of interactive users.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_USER_INFO	DEF_5MIN	5 MI
USER_GUI_CNT_SER	Number of interactive users(server)						/DVD/MON_CL_COL_USER_INFO
USER_INT_MOD	Number of internal modes	This KPI is number of active users.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_USER_INFO	DEF_5MIN	5 MI
USER_INT_MOD_SER	Number of internal modes(server)						/DVD/MON_CL_COL_USER_INFO
USER_RFC_CNT	Number of RFC-users	This KPI is number of RFC-users.	SAPSYS	SYS	any server	Remote system	/DVD/MON_CL_COL_USER_INFO	DEF_5MIN	5 MI
USER_RFC_CNT_SER	Number of RFC-users(server)						/DVD/MON_CL_COL_USER_INFO
WP_BTC_CONF	Number of BTC configured (server)	Number of free BTC WP (for the instance) divided by total number of BTC WP. When it reaches zero, batch jobs are queuing. You can see total / free BTC WP in SAP with transaction SM66. Some charts display Used BTC % = 100 % - Free BTC %.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1HOUR	1 HO
WP_BTC_CONF_SUM	Number of BTC configured (all servers)	Number of free BTC WP (for the instance) divided by total number of BTC WP. When it reaches zero, batch jobs are queuing. You can see total / free BTC WP in SAP with transaction SM66.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_1HOUR	1 HO
WP_BTC_USED	Number of used BTC (server)	This KPI counts number of used BTC work processes on the server.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_BTC_USED_MAX	Usage of BTC (max all servers)	KPI value determines number of BTC work processes (WP) of server with the highest amount of BTC WP - returns value of the busiest server.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_BTC_USED_P	Usage of BTC (server)	Number of used BTC WP (for the instance) divided by total number of BTC WP. When it reaches 100%, batch jobs are queuing. You can see total / free BTC WP in SAP with transaction SM66.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_BTC_USED_S_P	Number of used BTC (all servers)	For the WP info we calculate the number of batch workprocesses (BTC WP) currently used for the system (SID), in percentage of total number of BTC WP configured for this system. It’s not looking at a specific application server but calculated for the sum of all application server.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_BTC_USED_SUM	Usage of BTC (all servers)	Count the number of used DIA workprocesses captured in sm66 (saved in /DVD/MON_WPINFO on the central instance), for all application servers.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_COMMIT	Number of WP in COMMIT state	This kpi counts the number of WP in COMMIT state captured in sm66 (saved in /DVD/MON_WPINFO on the central instance).	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_DIA_CONF	Number of DIA configured (server)	This KPI is the number of DIA work processes configured on the server.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1HOUR	1 HO
WP_DIA_CONF_SUM	Number of DIA configured (all servers)	This KPI is the number of DIA work processes configured on all servers.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_1HOUR	1 HO
WP_DIA_LONGR	Longest running DIA WP (server)	This KPI is longest running DIA work process - in seconds.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_DIA_LONGR_MAX	Longest running DIA WP (max all servers)	Max value of runtime of DIA WP captured in sm66 (saved in /DVD/MON_WPINFO on the central instance).	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_DIA_NBR_AT	Number of long running DIA WP (server)	Adjusted value of "Average response DIA (sec)" excluding DIA WP from users RFC-* and DIA WP with duration greater than timeout, so the indicator adjusted will display only when several users have response time of several minutes.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_DIA_NBR_ATDU	Number of long running DIA WP for Dialog User (server)	This KPI is dependent is on parameters configured in the configure file, specifically the on parameter DIA_THRESHOLD_DIALOG_USER. It returns number of dialog WP which duration is longer then the predetermined value by parameter. The default value is 120 seconds. Value can be changed in collector parameters setup.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_DIA_NBR_ATDUS	Number of long running DIA WP for Dialog User (all servers)	This KPI is dependent is on parameters configured in the configure file, specifically the on parameter DIA_THRESHOLD_DIALOG_USER. It counts the number of all dialog WP from all servers which duration is longer then the predetermined value by parameter. The default value is 120 seconds. Value can be changed in collector parameters setup.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_DIA_NBR_ATSUM	Number of long running DIA WP (all servers)	A snapshot of sm66 is taken every 5 minutes (saved in /DVD/MON_WPINFO on the central instance). This KPI is the number of DIA WP running for more than 120sec that are in the captured sm66. The threshold (120sec) can be changed in the parameters of the collector /DVD/MON_CL_COL_GET_WP.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_DIA_RT_AVG	Avg. runtime of DIA processes (server)	Average response time of dialog WP captured in SM66. The exact value is meaningless, but the trend is important and when increasing it can show a lock-wait situation or few WP that are not killed after timeout. Values are capture for all application servers. The chart displays the average for the instance.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_DIA_RT_AVG_A	Avg. runtime of DIA processes (all servers)	Average response time of dialog WP captured in SM66. The exact value is meaningless, but the trend is important and when increasing it can show a lock-wait situation or few WP that are not killed after timeout. Values are capture for all application servers.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_DIA_USED	Number of used DIA (server)	This KPI counts number of used dialog WP on server.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_DIA_USED_MAX	Number of used DIA (max all servers)	Max value of number of DIA WP used per server in percentage of total number of DIA WP in the same server. When all DIA are used on an application server, the users connected on this server could have connection issue, even if some DIA WP are available on other application servers.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_DIA_USED_P	Usage of DIA (server)	Number of free DIA WP (for the instance) divided by total number of DIA WP. You can see total/free DIA WP in SAP with transaction SM66. When it reaches zero, the server looks frozen for many users. The trend shows if more of less PW are running. To be compare to CPU load: If CPU load increases dramatically and number of WP is stable, it show bad behaviour, unless CPU load goes above 80%. Some charts display Used DIA% = 100% - Free DIA %.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_DIA_USED_S_P	Number of used DIA (all servers)	Number of free DIA WP (for the instance) divided by total number of DIA WP. Workprocess Info (ie SM66) is captured every 5 minutes. For the WP info we calculate the number of dialog workprocesses(DIA WP) currently used for the system (SID), in percentage of total number of DIA WP configured in this system. ie it's not looking at specific application server but calculated for the sum of all application server. When it reaches zero, the server looks frozen for many users. The trend shows if more of less PW are running.To be compare to CPU load: If CPU load increases dramatically and number of WP is stable,it show bad behaviour, unless CPU load goes above 80%. Some charts display Used DIA % = 100 % - Free DIA %.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_DIA_USED_SUM	Usage of DIA (all servers)	Count the number of used DIA workprocesses captured in sm66 (saved in /DVD/MON_WPINFO on the central instance), for all application servers.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_MAX_REPORT	Number of WP on same report (all servers)	Count the number of workprocesses (DIA or BTC) on the same report captured in sm66 (saved in /DVD/MON_WPINFO on the central instance), for all users.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_MAX_TABLE	Number of WP on same table (all servers)	Count the number of workprocesses (DIA or BTC) on the same table name, captured in sm66 (saved in /DVD/MON_WPINFO on the central instance), for all users.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_MAX_USER	Number of WP with the same user (all servers)	Count the number of workprocesses (DIA or BTC) with the same user captured in sm66 (saved in /DVD/MON_WPINFO on the central instance), for user type ‘A’:Dialog user.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_NRIV	Number of WP accessing number ranges	Count number of WP captured in sm66 (saved in /DVD/MON_WPINFO on the central instance) showing table = NRIV.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1MIN	1 MI
WP_SAPLSENA	Number of WP calling ENQUEUE	This kpi counts the number of WP running report SAPLSENA in captured sm66 (saved in /DVD/MON_WPINFO on the central instance). Those are processing enqueues. If too many enq are raised at the same time, or if processing of enq is slow,we have seen hundreds WP hanging in SAPLSENA. Eventually all WP can be used and the complete system will be hanging. When there are many ENQ, the DIA will take longer, see the chart below showing the correlation between the No. of DIA WP running for more than 120secand the number of WP in SAPLSENA.	SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_UP2_CONF	Number of UP2 configured (server)	This KPI is number of configured work processes for task processing on server - these tasks are in update process with the priority V2.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1DAY	1 DA
WP_UP2_CONF_SUM	Number of UP2 configured (all servers)	This KPI is number of configured work processes for task processing on all servers - these tasks are in update process with the priority V2.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_1DAY	1 DA
WP_UP2_USED	Number of used UP2 (server)	UP2 is used for 'statistical' updates (and some RFC signaling). Number of used UP2 WP (for the instance) divided by total number of UP2 WP. When it reaches 100%, all transactions are stopped. You can see total / free UP2 WP in SAP with transaction SM66.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_UP2_USED_SUM	Number of used UP2 (all servers)	UP2 is used for 'statistical' updates (and some RFC signaling).Number of used UP2 WP (for the instance) divided by total number of UP2 WP.When it reaches 100%, all transactions are stopped.You can see total / free UP2 WP in SAP with transaction SM66.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_UPD_CONF	Number of UPD configured (server)	This KPI is number of configured work processes for task processing on server - these tasks are in update process with the highest priority (V1).	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_1DAY	1 DA
WP_UPD_CONF_SUM	Number of UPD configured (all servers)	This KPI is number of configured work processes for task processing on all servers - these tasks are in update process with the highest priority (V1).	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_1DAY	1 DA
WP_UPD_USED	Number of used UPD (server)	Number of used UPD WP (for the instance) divided by total number of UPD WP. When it reaches 100%, all transactions are stopped. You can see total / free UPD WP in SAP with transaction SM66.	SAPSYS	SER	only application server	Remote system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
WP_UPD_USED_SUM	Number of used UPD (all servers)	Number of used UPD WP (for the instance) divided by total number of UPD WP. When it reaches 100%, all transactions are stopped.You can see total / free UPD WP in SAP with transaction SM66.	SAPSYS	SYS	only application server	Central system	/DVD/MON_CL_COL_GET_WP	DEF_5MIN	5 MI
SDTR_ERROR_CNT	Number of all transmission in error		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_SEND_TRANSMIT	DEF_1HOUR	1 HO
SDTR_TRANSMT_CNT	Number of successfully transmitted mail requests		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_SEND_TRANSMIT	DEF_1HOUR	1 HO
SDTR_WAITING_CNT	Number of waiting transmissions		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_SEND_TRANSMIT	DEF_1HOUR	1 HO
USR_STAT_INACT6M	Number of inactive user not logon in last 6 months		SAPSYS	SYS	only application server	Remote system	/DVD/MON_CL_COL_USR_STAT	DEF_1DAY	1 DA
GRC_REF_USR_CNT	Number of used reference users		GRC	SYS	any server	Remote system	/DVD/MON_GRC_CL_COL_REF_USERS		1 MI
GRC_SEC_NOTE_CNT	Number of not implemented security notes		SAPSYS	SYS	any server	Remote system	/DVD/MON_GRC_CL_COL_SEC_NOTES
GRC_AUTH_ALL	Number of user with full authorization (SAP_ALL,SAP_NEW)		GRC	SYS	only application server	Remote system	/DVD/MON_GRC_CL_COL_USR_AUTH	GRC_1DAY	1 DA
GRC_AUTH_ALL_O_N	Number of NEW users with full authorization(SAP_ALL,SAP_NEW)		GRC	SYS	only application server	Remote system	/DVD/MON_GRC_CL_COL_USR_AUTH
ORA_LOG_00060	ORA-00060 - Deadlock detected while waiting for resource		ORACLE	SYS	any server	Remote system	/DVD/MON_ORA_CL_COL_ALERTLOG	ORA_5MIN	5 MI
ORA_LOG_01578	ORA-01578 - Data block corrupted		ORACLE	SYS	any server	Remote system	/DVD/MON_ORA_CL_COL_ALERTLOG	ORA_5MIN	5 MI
ORA_LOG_01653	ORA-01653 - Unable to extend table . by * in tablespace *		ORACLE	SYS	any server	Remote system	/DVD/MON_ORA_CL_COL_ALERTLOG	ORA_5MIN	5 MI
ORA_LOG_27072	ORA-27072 - File I/O error		ORACLE	SYS	any server	Remote system	/DVD/MON_ORA_CL_COL_ALERTLOG	ORA_5MIN	5 MI
ORA_PGA_USED	Oracle: Total PGA memory used		ORACLE	SER	only external server	Remote system	/DVD/MON_ORA_CL_COL_MEM		5 MI
ORA_SESS_ALL	Number of Oracle sessions		ORACLE	SYS	any server	Remote system	/DVD/MON_ORA_CL_COL_SESSION		5 MI
ORA_SESS_INST	Oracle sessions per instance		ORACLE	SER	only external server	Remote system	/DVD/MON_ORA_CL_COL_SESSION		5 MI
ORA_TS_SIZEP	DB used size (table spaces)		ORACLE	SYS	any server	Remote system	/DVD/MON_ORA_CL_COL_SPACE		5 MI
ORA_LOG_30036	ORA-30036 - Unable to extend segm. by * in undo tab.sp. '*'		ORACLE	SYS	any server	Remote system	/DVD/MON_ORA_CL_COL_ALERTLOG	ORA_5MIN	5 MI
OS_RUN_PS_COUNT	Get number of running processes on OS	Get count of running processes on OS. Exemple KPI for collector /DVD/MON_CL_COL_SYS_CMD, that can run any OS command.	OS	SYS	only application server	Remote system	/DVD/MON_CL_COL_SYS_CMD
VFORGE_SP_U	SystemProfiler: Number of Undefined findings		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_BITC	VF
VFORGE_SP_X_3	SystemProfiler: Number of low impact errors		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_BITC	VF
VFORGE_SP_X_5	SystemProfiler: Number of medum impact errors		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_BITC	VF
VFORGE_SP_X_7	SystemProfiler: Number of high impact errors		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_BITC	VF
VFORGE_SP_X_9	SystemProfiler: Number of very high impact errors		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_BITC	VF
VFORGE_CP_AUTH	Missing AUTHORITY-CHECK in Reports		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VFORGE_CP_DB_MOD	Direct Database Modification		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VFORGE_CP_INJECT	ABAP Command injection		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VFORGE_CP_OS_INJ	OS Command Injection		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VF_TD_COMP	CodeProfiler: Compliance findings		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VF_TD_DLP	CodeProfiler: Data-Loss Prevention findings		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VF_TD_MNT	CodeProfiler: Maintainability findings		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VF_TD_PERF	CodeProfiler: Performance findings		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VF_TD_ROB	CodeProfiler: Robustness findings		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF
VF_TD_SECUR	CodeProfiler: Security findings		VFORGE	SYS	only application server	Remote system	/DVD/MON_VF_CL_COL_CP	VF