{"type":"doc","content":[{"type":"layoutSection","content":[{"type":"layoutColumn","attrs":{"width":66.66},"content":[{"type":"paragraph","content":[{"text":"Java connector is a component used for authentication and communication with remote services using JDBC drivers or Java SDKs. It runs as an independent OS process and can be configured and controlled through transaction ","type":"text"},{"text":"/DVD/JCO_MNG","type":"text","marks":[{"type":"code"}]},{"text":".","type":"text"}]}]},{"type":"layoutColumn","attrs":{"width":33.33},"content":[{"type":"paragraph","content":[{"text":"In this section:","type":"text","marks":[{"type":"strong"}]}]},{"type":"extension","attrs":{"layout":"default","extensionType":"com.atlassian.confluence.macro.core","extensionKey":"children","parameters":{"macroParams":{},"macroMetadata":{"macroId":{"value":"7f440084-1af4-4ad3-ad62-599318173cfa"},"schemaVersion":{"value":"2"},"title":"Children Display"}},"localId":"7d8a06a7-610b-4015-bfe9-e76c188b3a12"}}]}]},{"type":"mediaSingle","attrs":{"layout":"align-start","width":65.0},"content":[{"type":"media","attrs":{"width":1187,"id":"5e552ed7-e3b3-4d0e-a4c8-ab764c814d85","collection":"contentId-4145414348","type":"file","height":357}}]},{"type":"paragraph","content":[{"text":"/DVD/JCO_MNG","type":"text","marks":[{"type":"code"}]},{"text":" allows you to link the Java connector (JCO) with the SAP RFC destination which will be used as a communication channel between SAP and JCO and maintain the connector. ","type":"text"},{"type":"hardBreak"}]},{"type":"paragraph","content":[{"text":"Table of Contents:","type":"text","marks":[{"type":"strong"}]}]},{"type":"extension","attrs":{"layout":"default","extensionType":"com.atlassian.confluence.macro.core","extensionKey":"toc","parameters":{"macroParams":{},"macroMetadata":{"macroId":{"value":"6d5b3856-ea1a-4950-84eb-b2d6ff7dc87b"},"schemaVersion":{"value":"1"},"title":"Table of Contents"}},"localId":"f08a0a72-6259-4544-8f61-257987c6bc02"}},{"type":"heading","attrs":{"level":1},"content":[{"text":"Deploying Java connector locally ","type":"text"}]},{"type":"paragraph","content":[{"text":"By default, the Java connector is deployed directly on the SAP ABAP application server and can be managed from the SAP Gui. If the operating system of the application server is Linux x64 or Windows x64, the setup is very straightforward. In case you are using another operating system or architecture, follow additional steps in ","type":"text"},{"text":"Using custom Java Runtime","type":"text","marks":[{"type":"strong"},{"type":"em"}]},{"text":".","type":"text"}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"SAP RFC role and user","type":"text"}]},{"type":"paragraph","content":[{"text":"Java connector uses a dedicated user in the SAP system for registration on the SAP gateway and further communication between ABAP and Java.","type":"text"},{"type":"hardBreak"},{"text":"This user should be created with the type ","type":"text"},{"text":"System","type":"text","marks":[{"type":"code"}]},{"text":" and with authorizations limiting his privileges to basic RFC communication.","type":"text"}]},{"type":"paragraph","content":[{"text":"Pre-created role ","type":"text"},{"text":"/dvd/jcorfc","type":"text","marks":[{"type":"code"}]},{"text":" is included with the software and can be used as is, or as a template for custom role.","type":"text"}]},{"type":"paragraph","content":[{"text":"The required authorization object is ","type":"text"},{"text":"S_RFC","type":"text","marks":[{"type":"code"}]},{"text":" with these settings:","type":"text"}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"ACTVT = 16","type":"text","marks":[{"type":"code"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"RFC_NAME = RFC1, RFC_METADATA, SDIFRUNTIME, SYST","type":"text","marks":[{"type":"code"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"RFC_TYPE = FUGR","type":"text","marks":[{"type":"code"}]}]}]}]},{"type":"heading","attrs":{"level":2},"content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.macro.core","extensionKey":"anchor","parameters":{"macroParams":{"":{"value":"Java-Connector-RFC"}},"macroMetadata":{"macroId":{"value":"a44ff03436101cba9d30bc338d7675a3"},"schemaVersion":{"value":"1"},"title":"Anchor"}},"localId":"659e09c8-2cca-4ae7-9b99-17bd2fe22633"}},{"text":"Java Connector RFC","type":"text"}]},{"type":"paragraph","content":[{"text":"Java Connector RFC is used to reference the Java service registered on the SAP gateway. Use the template below as a reference.","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"align-start"},"content":[{"type":"media","attrs":{"width":675,"id":"4ebc6d71-a96e-4b0b-b194-1825ab7f7f95","collection":"contentId-4145414348","type":"file","height":761}}]},{"type":"paragraph","content":[{"text":"Settings:","type":"text"}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Connection Type","type":"text","marks":[{"type":"code"}]},{"text":": T for TCP/IP Connection","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Activation Type","type":"text","marks":[{"type":"code"}]},{"text":": Select Registered Server Program","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Program ID","type":"text","marks":[{"type":"code"}]},{"text":": Name of the program how JCO will identify itself when logged on to SAP gateway (Example: DATAVARD_JAVA_CONN)","type":"text"}]}]}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"SAP Gateway Access","type":"text"}]},{"type":"paragraph","content":[{"text":"External communication with the SAP system goes through the SAP gateway. If the SAP system parameter ","type":"text"},{"text":"gw/acl_mode","type":"text","marks":[{"type":"code"}]},{"text":" is enabled, there are files ","type":"text"},{"text":"reginfo","type":"text","marks":[{"type":"code"}]},{"text":" that limit the access of external programs.","type":"text"},{"type":"hardBreak"},{"text":"In this case, a program needs to have granted access either by wildcard definition or by explicitly defining the program registration name (in our example it is ","type":"text"},{"text":"DATAVARD_JAVA_CONN","type":"text","marks":[{"type":"code"}]},{"text":").","type":"text"}]},{"type":"paragraph","content":[{"text":"More information on the SAP gateway ACL topic can be found on the SAP website ","type":"text"},{"text":"Gateway Security Files secinfo and reginfo","type":"text","marks":[{"type":"link","attrs":{"href":"https://help.sap.com/saphelp_nw73/helpdata/en/e2/16d0427a2440fc8bfc25e786b8e11c/content.htm?no_cache=true"}}]},{"text":".","type":"text"}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"/DVD/JCO_MNG initial setup","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Select the latest JCO version by double-clicking the row on the left side of the screen","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Switch to ","type":"text"},{"text":"Edit mode","type":"text","marks":[{"type":"code"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click ","type":"text"},{"text":"Fill default values","type":"text","marks":[{"type":"code"}]},{"text":" ","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Fill ","type":"text"},{"text":"RFC Destination","type":"text","marks":[{"type":"code"}]},{"text":" in the ","type":"text"},{"text":"General","type":"text","marks":[{"type":"code"}]},{"text":" tab","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center"},"content":[{"type":"media","attrs":{"width":427,"id":"dbe145d4-a9a2-435b-b465-b483c5dc7623","collection":"contentId-4145414348","type":"file","height":213}}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Fill in ","type":"text"},{"text":"Technical user Credentials","type":"text","marks":[{"type":"code"}]},{"text":" in the ","type":"text"},{"text":"Config","type":"text","marks":[{"type":"code"}]},{"text":" tab. ","type":"text"},{"type":"hardBreak"},{"text":"Optionally, customize the ","type":"text"},{"text":"Install directory","type":"text","marks":[{"type":"code"}]},{"text":". Logical path ","type":"text"},{"text":"","type":"text","marks":[{"type":"code"}]},{"text":" translates to ","type":"text"},{"text":"/usr/sap///work/dvd_conn/","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"}]},{"type":"mediaSingle","attrs":{"layout":"center"},"content":[{"type":"media","attrs":{"width":596,"id":"f17fe091-c849-478c-89dd-6b86761eb84a","collection":"contentId-4145414348","type":"file","height":206}}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Select the latest library in ","type":"text"},{"text":"Libraries","type":"text","marks":[{"type":"code"}]}]},{"type":"mediaSingle","attrs":{"layout":"center"},"content":[{"type":"media","attrs":{"width":585,"id":"e2cf74af-67ee-41bd-9341-40106cf755ad","collection":"contentId-4145414348","type":"file","height":222}}]},{"type":"paragraph"}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Go back to the ","type":"text"},{"text":"General","type":"text","marks":[{"type":"code"}]},{"text":" tab, ","type":"text"},{"text":"Save","type":"text","marks":[{"type":"code"}]},{"text":" and click ","type":"text"},{"text":"Restart","type":"text","marks":[{"type":"code"}]},{"text":" to deploy the Java connector","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":55.0},"content":[{"type":"media","attrs":{"width":509,"id":"4e0f7fbb-effb-46e3-bf92-9b3497d889e9","collection":"contentId-4145414348","type":"file","height":166}}]},{"type":"paragraph"}]}]},{"type":"panel","attrs":{"panelIconId":"atlassian-note","panelIcon":":note:","panelColor":"#F4F5F7","panelType":"custom"},"content":[{"type":"heading","attrs":{"level":3},"content":[{"text":"Advanced parameters description","type":"text"}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"OS Command for starting Java service: ","type":"text","marks":[{"type":"strong"}]},{"text":"Name of an OS command for starting Java service (SM69)","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"OS Command for setting access permissions: ","type":"text","marks":[{"type":"strong"}]},{"text":"Name of an OS command for setting execution rights (SM69)","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"OS Command for 7Zip: ","type":"text","marks":[{"type":"strong"}]},{"text":"Name of an OS command for unpacking libraries and embedded JRE (only if embedded JRE is chosen) (SM69)","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Max RAM used: ","type":"text","marks":[{"type":"strong"}]},{"text":"Maximum amount of RAM used by Java service (heap size)","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Additional Java starting arguments: ","type":"text","marks":[{"type":"strong"}]},{"text":"Additional arguments used to start the Java service","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Repository destination: ","type":"text","marks":[{"type":"strong"}]},{"text":"Client destination from which repository should be obtained","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Work thread MIN: ","type":"text","marks":[{"type":"strong"}]},{"text":"Number of threads Java service always runs with","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Work thread MAX: ","type":"text","marks":[{"type":"strong"}]},{"text":"Maximum number of threads that can be used by the Java service","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Connection count: ","type":"text","marks":[{"type":"strong"}]},{"text":"Number of connections registered at SAP gateway","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Peak limit: ","type":"text","marks":[{"type":"strong"}]},{"text":"Limit of JCo connections at peak","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Log4j log level: ","type":"text","marks":[{"type":"strong"}]},{"text":"Level of messages collected in logs","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Log4j log deletion: ","type":"text","marks":[{"type":"strong"}]},{"text":"Log retention period","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Log files path: ","type":"text","marks":[{"type":"strong"}]},{"text":"Directory where the log files will be saved","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"JAR path: ","type":"text","marks":[{"type":"strong"}]},{"text":"Path where the JCO JAR file will be created","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Log4j config path: ","type":"text","marks":[{"type":"strong"}]},{"text":"Path where the log4j config file will be created","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Server config path: ","type":"text","marks":[{"type":"strong"}]},{"text":"Path where the server config will be created","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Destination config path: ","type":"text","marks":[{"type":"strong"}]},{"text":"Path where the destination config will be created","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Avoid JCO config files creation","type":"text","marks":[{"type":"strong"}]},{"text":": Special option which prevents automatic overwriting of existing JCO files. Useful for cases when manual modification of configuration files is needed (troubleshooting).","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Use JCO dir for parquet conversion","type":"text","marks":[{"type":"strong"}]},{"text":": If required, JCO performs data conversion into PARQUET format. This is by default done in memory; when this option is active, conversion is done using temporary files in JCO_install_dir/parquet subdirectory. This may be necessary if the memory allowance for JCO is limited.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Embedded JRE","type":"text","marks":[{"type":"strong"}]},{"text":": Path to embedded JRE (nested in Install directory in Config Tab (JCO_HOME))","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Use custom JRE","type":"text","marks":[{"type":"strong"}]},{"text":": Checkbox whether ot not to use custom JRE for JCo, if checkbox is not checked, then embedded JRE is used","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Custom JRE","type":"text","marks":[{"type":"strong"}]},{"text":": Path to custom JRE (can be nested in Install directory in Config Tab (JCO_HOME), or anywhere on the system) ","type":"text"}]}]}]}]},{"type":"panel","attrs":{"panelType":"info"},"content":[{"type":"paragraph","content":[{"text":"The Java service is started with a system command. You can adjust the name of this command in the table Advanced tab. The default name of the command is ZDVD_START_JAVA. In the case the system command doesn't exist, it is created automatically. You can view the system commands through the transaction SM69. On Linux, another system command is required, which sets executable rights for the configuration files (chmod 755 ). Its name can be adjusted in the Advanced tab.","type":"text"}]}]},{"type":"panel","attrs":{"panelType":"info"},"content":[{"type":"paragraph","content":[{"text":"The following authorizations are required for the automatic start of the Java process:","type":"text"}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"S_RFC_ADM (Administration for RFC Destination): ACTVT = 03, RFCTYPE = * , RFCDEST = , ICF_VALUE = * ","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"S_DATASET (Authorization for file access): PROGRAM =/DVD/*, ACTVT = *, FILENAME = * ","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"S_LOG_COM (Authorization to Execute Logical Operating System Commands): COMMAND = ZDVD*, OPSYSTEM = * , HOST = * ","type":"text"}]}]}]},{"type":"paragraph","content":[{"text":"Management of JCO config versions (upload/download) also requires S_GUI (Authorization for GUI activities) with ACTVT = 61,60","type":"text"}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Using custom Java Runtime","type":"text"}]},{"type":"paragraph","content":[{"text":"As of version Reuse Library 22.08, the SNP Java connector comes with regularly updated embedded Java runtime (Adoptium 11) for ","type":"text"},{"text":"Linux 86_x64","type":"text","marks":[{"type":"strong"}]},{"text":" and ","type":"text"},{"text":"Windows x64","type":"text","marks":[{"type":"strong"}]},{"text":" and no manual setup is required in this regard. ","type":"text"}]},{"type":"paragraph","content":[{"text":"If you have another operating system (Solaris, AIX, etc.), or you cannot use embedded JRE for any reason, you will need to deploy your Java runtime and libsapjco3 libraries manually.","type":"text"}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"Java runtime environment (JRE)","type":"text"}]},{"type":"paragraph","content":[{"text":"Recommended JRE is OpenJDK 11","type":"text","marks":[{"type":"strong"}]},{"text":", but generally, the recent releases of Java 8 are usable. OpenJDK can be downloaded from the ","type":"text"},{"text":"Adoptium download site","type":"text","marks":[{"type":"link","attrs":{"href":"https://adoptium.net/temurin/releases/?version=11"}}]},{"text":" for most architectures.","type":"text"}]},{"type":"paragraph","content":[{"text":"Not to interfere with possible Java installation already present on the SAP application server, the archive can be simply unpacked into any directory accessible to adm, e.g. ","type":"text"},{"text":"/sapmnt//global/JRE_11/","type":"text","marks":[{"type":"code"}]},{"text":".","type":"text"}]},{"type":"paragraph","content":[{"text":"The option to choose between embedded JRE and custom JRE can be found in the Advanced Tab of ","type":"text"},{"text":"/DVD/JCO_MNG","type":"text","marks":[{"type":"code"}]},{"text":" transaction:","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"align-start"},"content":[{"type":"media","attrs":{"width":719,"id":"d6323679-8dff-4c1a-a2a1-e25694c2db54","collection":"contentId-4145414348","type":"file","height":106}}]},{"type":"paragraph","content":[{"text":"Parameters:","type":"text"}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Embedded JRE","type":"text","marks":[{"type":"strong"}]},{"text":": Path to embedded JRE Java binary. It is by default nested in the Install directory defined in Config Tab (JCO_HOME).","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Use custom JRE","type":"text","marks":[{"type":"strong"}]},{"text":": Checkbox whether or not to use custom JRE. In the default configuration, the checkbox is unchecked, so embedded JRE will be deployed and there is no need to specify Custom JRE.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Custom JRE","type":"text","marks":[{"type":"strong"}]},{"text":": Path to custom JRE Java binary. This option is usually needed on non-standard operating systems (see information below).","type":"text"}]}]}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"SAP Java Connector library","type":"text"}]},{"type":"paragraph","content":[{"text":"Java Connector uses a shared library published by SAP named ","type":"text"},{"text":"libsapjco3.so","type":"text","marks":[{"type":"code"}]},{"text":" (or ","type":"text"},{"text":"sapjco3.dll","type":"text","marks":[{"type":"code"}]},{"text":" on Windows OS). ","type":"text"},{"type":"hardBreak"},{"text":"Starting with SNP JCo version 229, the library is included in SNP transports for ","type":"text"},{"text":"Linux 86_x64 and Windows x64","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"},{"type":"hardBreak"},{"text":"If the system hosting JCo is running on OS ","type":"text"},{"text":"other","type":"text","marks":[{"type":"strong"}]},{"text":" than Linux 86_x64 and Windows x64, it is necessary to ","type":"text"},{"text":"manually download and replace the library","type":"text","marks":[{"type":"strong"}]},{"text":" ","type":"text"},{"text":"after the first attempt to start the JCo","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"},{"type":"hardBreak"},{"text":"The first start attempt will fail due to incompatibility, but it will deploy all other libraries and configuration files needed for the JCo run. The location of the libraries is ","type":"text"},{"text":"//lib/","type":"text","marks":[{"type":"code"}]},{"text":".","type":"text"}]},{"type":"paragraph","content":[{"text":"SAP Java connector library can be downloaded at ","type":"text"},{"type":"inlineCard","attrs":{"url":"https://support.sap.com/en/product/connectors/jco.html"}},{"text":".","type":"text"}]},{"type":"paragraph","content":[{"text":"Once uploaded to the JCo host, after the first startup attempt (see below), simply replace the library and change the ownership to adm:sapsys, for example:","type":"text"}]},{"type":"codeBlock","content":[{"text":"cp libsapjco3.so /usr/sap/NSD/DVEBMGS01/work/dvd_conn/jco233/lib/\nchown nsdadm:sapsys /usr/sap/NSD/DVEBMGS01/work/dvd_conn/jco233/lib/libsapjco3.so","type":"text"}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Central Java instance","type":"text"}]},{"type":"paragraph","content":[{"text":"It is possible to have a single Java connector running, instead of running one on every application server. To set such a scenario, follow these steps:","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"If the Java connector is already running on several application servers, stop all instances.","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":45.0},"content":[{"type":"media","attrs":{"width":674,"id":"8452ecfd-36c8-4743-b13c-280e003936ef","collection":"contentId-4145414348","type":"file","height":83}}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Open the Java RFC destination and fill in the Gateway options valid for the desired instance","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":30.0},"content":[{"type":"media","attrs":{"width":555,"id":"a60af2ea-f988-4329-bd97-9e26d0bb9ef5","collection":"contentId-4145414348","type":"file","height":784}}]},{"type":"paragraph"}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"When you restart the transaction ","type":"text"},{"text":"/DVD/JCO_MNG","type":"text","marks":[{"type":"code"}]},{"text":", only buttons belonging to the desired application server should be functional and all the other app. servers should be using this connection.","type":"text"},{"type":"hardBreak"},{"text":"Start the connector and all rows in the ","type":"text"},{"text":"Connection","type":"text","marks":[{"type":"code"}]},{"text":" column should be green.","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":40.0},"content":[{"type":"media","attrs":{"width":659,"id":"63d4f27d-8c15-427e-b79a-2185ade4617d","collection":"contentId-4145414348","type":"file","height":250}}]},{"type":"paragraph"}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Setting up the connection via the proxy server","type":"text"}]},{"type":"paragraph","content":[{"text":"Sometimes communication with a service outside the corporate network needs to be routed through a proxy server to comply with company security standards.","type":"text"}]},{"type":"paragraph","content":[{"text":" To achieve this, you need to add the following Java parameters to the ","type":"text"},{"text":"Additional Java starting arguments","type":"text","marks":[{"type":"code"}]},{"text":" field in the ","type":"text"},{"text":"Advanced","type":"text","marks":[{"type":"code"}]},{"text":" tab of ","type":"text"},{"text":"/DVD/JCO_MNG","type":"text","marks":[{"type":"code"}]},{"text":".","type":"text"}]},{"type":"codeBlock","content":[{"text":"-Dhttp.useProxy=true\n-Dhttps.proxyHost=\n-Dhttp.proxyHost=\n-Dhttps.proxyPort=\n-Dhttp.proxyPort=","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"align-start"},"content":[{"type":"media","attrs":{"width":678,"id":"214132e0-ef95-43dc-8c48-06b3bc3c5e0f","collection":"contentId-4145414348","type":"file","height":251}}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"SNC configuration","type":"text"}]},{"type":"paragraph","content":[{"text":"If the SAP system is hardened by enabled Secured Network Communication (system parameter ","type":"text"},{"text":"snc/enable = 1","type":"text","marks":[{"type":"em"}]},{"text":"), there are additional configuration steps.","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The first step is the creation of a Personal Security Environment (PSE) for JCo. This is to be done under ","type":"text"},{"text":"adm","type":"text","marks":[{"type":"strong"}]},{"text":" user. PSE should be stored together with other SAP PSE files, by default on path ","type":"text"},{"text":"/usr/sap///sec","type":"text","marks":[{"type":"strong"}]},{"text":", referenced by environment variable ","type":"text"},{"text":"$SECUDIR","type":"text","marks":[{"type":"strong"}]},{"text":". Commands to create the PSE, with an example of system ID NSZ with csh as nszadm’s shell:","type":"text"},{"type":"hardBreak"},{"text":"su - nszadm","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"},{"text":"setenv SECUDIR /usr/sap/NSZ/D00/sec","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"},{"text":"cd $SECUDIR","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"},{"text":"sapgenpse gen_pse -v -p DVDJCO.pse","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"},{"type":"hardBreak"},{"text":"A passphrase can optionally protect PSE. The mandatory input parameter is the Distinguished name of the PSE owner, in our example, it’s ","type":"text"},{"text":"CN=JCO_RFC, OU=DVD, C=DE","type":"text","marks":[{"type":"code"}]}]},{"type":"codeBlock","content":[{"text":"nsz:nszadm 98> sapgenpse gen_pse -v -p DVDJCO.pse\nGot absolute PSE path \"/usr/sap/NSZ/D00/sec/DVDJCO.pse\".\nPlease enter PSE PIN/Passphrase:\nPlease reenter PSE PIN/Passphrase:\n!!! WARNING: For security reasons it is recommended to use a PIN/passphrase\n!!! WARNING: which is at least 8 characters long and contains characters in\n!!! WARNING: upper and lower case, numbers and non-alphanumeric symbols.\n\nget_pse: Distinguished name of PSE owner: CN=JCO_RFC, OU=DVD, C=DE\n Supplied distinguished name: \"CN=JCO_RFC, OU=DVD, C=DE\"\n Creating PSE with format v2 (default)\n succeeded.\n certificate creation... ok\n PSE update... ok\n PKRoot... ok\nGenerating certificate request... ok.\nCertificate Request:\n Signed Part:\n Subject: CN=JCO_RFC, OU=DVD, C=DE\n Key: rsaEncryption (2048 bits)\n Attributes: None\n Signature:\n Signature algorithm: sha256WithRsaEncryption (1.2.840.113549.1.1.11)\n Signature: \n\nPKCS#10 certificate request for \"/usr/sap/NSZ/D00/sec/DVDJCO.pse\":\n\n-----BEGIN CERTIFICATE REQUEST-----\nMIICcjCCAVoCAQAwLTELMAkGA1UEBhMCREUxDDAKBgNVBAsTA0RWRDEQMA4GA1UE\n################################################################\n################################################################\n################################################################\nPxmDNQSCYvLxURXcP+vQxDSOq5QYgQf4g4egjVXRcyQwOJNZRpHlP1olXc4Aa675\n-----END CERTIFICATE REQUEST-----\nnsz:nszadm 99>","type":"text"}]},{"type":"paragraph"}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The second step is to export the certificate with the public key from the newly created PSE, using the command:","type":"text"},{"type":"hardBreak"},{"text":"sapgenpse export_own_cert -v -p DVDJCO.pse -o DVDJCO.crt","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"},{"text":"This produces a DVDJCO.crt file.","type":"text"},{"type":"hardBreak"}]},{"type":"codeBlock","content":[{"text":"nsz:nszadm 99> sapgenpse export_own_cert -v -p DVDJCO.pse -o DVDJCO.crt\n\n Opening PSE \"/usr/sap/NSZ/D00/sec/DVDJCO.pse\"...\n No SSO credentials found for this PSE.\n PSE (v2) open ok.\n Retrieving my certificate... ok.\n Writing to file (PEM-framed base64-encoded)... ok.\n\nnsz:nszadm 100>","type":"text"}]},{"type":"paragraph"}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Now import the DVD JCo certificate file into the SAP system’s Trust manager. ","type":"text"},{"type":"hardBreak"},{"text":"Run transaction ","type":"text"},{"text":"STRUST","type":"text","marks":[{"type":"strong"}]},{"text":" → switch to ","type":"text"},{"text":"Edit","type":"text","marks":[{"type":"strong"}]},{"text":" mode → double-click ","type":"text"},{"text":"SNC PSE node","type":"text","marks":[{"type":"strong"}]},{"text":" → in the lower part of the screen click on the ","type":"text"},{"text":"Import certificate","type":"text","marks":[{"type":"strong"}]},{"text":" icon, locate the certificate file, confirm file selection → click ","type":"text"},{"text":"Add to Certificate List","type":"text","marks":[{"type":"strong"}]},{"text":" → ","type":"text"},{"text":"Save","type":"text","marks":[{"type":"strong"}]},{"text":" (Ctrl+S)","type":"text"},{"type":"hardBreak"},{"text":"NOTE: You may need to download the certificate file to your front end to be able to select it.","type":"text"},{"type":"hardBreak"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":45.0},"content":[{"type":"media","attrs":{"width":1250,"id":"3bfcc082-03f5-42f4-9b90-78313da9800e","collection":"contentId-4145414348","type":"file","height":905}}]},{"type":"paragraph","content":[{"text":" ","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"We have imported the JCo certificate to SAP. To create two-way trust between SAP and JCo, now we need to import the SAP system’s certificate to JCo PSE.","type":"text"},{"type":"hardBreak"},{"text":"Export SAP’s own certificate, similarly as in step 3. Run ","type":"text"},{"text":"STRUST","type":"text","marks":[{"type":"strong"}]},{"text":" and select the ","type":"text"},{"text":"SNC PSE node","type":"text","marks":[{"type":"strong"}]},{"text":", but double-click on ","type":"text"},{"text":"Own certificate,","type":"text","marks":[{"type":"strong"}]},{"text":" and at the bottom of the screen click the icon ","type":"text"},{"text":"Export certificate","type":"text","marks":[{"type":"strong"}]},{"text":". Choose ","type":"text"},{"text":"Base64","type":"text","marks":[{"type":"strong"}]},{"text":" format, path, and filename to save the .crt file. Upload the file to the application server, ideally to ","type":"text"},{"text":"$SECUDIR","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"},{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"To import the SAP certificate to JCo PSE, run the command:","type":"text"},{"type":"hardBreak"},{"text":"sapgenpse maintain_pk -v -a SAP.crt -p DVDJCO.pse","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"}]},{"type":"codeBlock","content":[{"text":"nsz:nszadm 104> sapgenpse maintain_pk -v -a NSZ.crt -p DVDJCO.pse\n\n Opening PSE \"/usr/sap/NSZ/D00/sec/DVDJCO.pse\"...\n No SSO credentials found for this PSE.\n PSE (v2) open ok.\n retrieving PKList\n Adding new certificate from file \"NSZ.crt\"\n----------\nSubject : CN=NSZ, OU=DVD, C=DE\nIssuer : CN=NSZ, OU=DVD, C=DE\nSerialno : 0A:20:21:01:24:10:44:01\nKeyInfo : RSA, 2048-bit\nValidity - NotBefore: Sun Jan 24 11:44:01 2021 (210124104401Z)\n NotAfter: Fri Jan 1 01:00:01 2038 (380101000001Z)\nKeyUsage : none\nExtKeyUsage : none\nSubjectAltName : none\n----------------------------------------------------------------------------\n\n PKList updated (1 entries total, 1 newly added)\n\nnsz:nszadm 105>","type":"text"}]},{"type":"paragraph"}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"To allow JCo to run under adm user using the credentials stored in the PSE, SSO credentials need to be created in the ","type":"text"},{"text":"cred_v2","type":"text","marks":[{"type":"strong"}]},{"text":" file.","type":"text"},{"type":"hardBreak"},{"text":"It is advised to back up the cred_v2 file before proceeding.","type":"text"},{"type":"hardBreak"},{"text":"The file should already exist in ","type":"text"},{"text":"SECUDIR","type":"text","marks":[{"type":"strong"}]},{"text":" and will be updated using the command:","type":"text"},{"type":"hardBreak"},{"text":"sapgenpse seclogin -p DVDJCO.pse -O nszadm","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"}]},{"type":"codeBlock","content":[{"text":"nsz:nszadm 105> cp -p cred_v2 cred_v2.bkp\nnsz:nszadm 106> sapgenpse seclogin -p DVDJCO.pse -O nszadm\n\n running seclogin with USER=\"nszadm\"\n creating credentials for yourself (USER=\"nszadm\")...\n Added SSO-credentials for PSE \"/usr/sap/NSZ/D00/sec/DVDJCO.pse\"\n\nnsz:nszadm 107>","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"},{"text":"Available SSO credentials can always be checked using the command:","type":"text"},{"type":"hardBreak"},{"text":"sapgenpse seclogin -l","type":"text","marks":[{"type":"code"}]},{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Now that the security environment is prepared, configure JCo SNC in transaction ","type":"text"},{"text":"/DVD/JCO_MNG","type":"text","marks":[{"type":"strong"}]},{"text":" in Config Tab:","type":"text"},{"type":"hardBreak"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":46.0},"content":[{"type":"media","attrs":{"width":928,"id":"cb013710-fcff-4bc3-bf9d-4f374b71624c","collection":"contentId-4145414348","type":"file","height":204}}]},{"type":"paragraph"},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"SNC enabled","type":"text","marks":[{"type":"strong"}]},{"text":": Once activated, user and password fields will be greyed out and have no effect on JCo configuration","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"SNC QoP Level","type":"text","marks":[{"type":"strong"}]},{"text":": SNC Quality of Protection, needs to be the same level as set in system parameter ","type":"text"},{"text":"snc/data_protection/use","type":"text","marks":[{"type":"em"}]},{"text":" (default = 3)","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"JCo SNC name","type":"text","marks":[{"type":"strong"}]},{"text":": Distinguished name chosen during the creation of JCo PSE (step 1.)","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"SNC-enabled GW port","type":"text","marks":[{"type":"strong"}]},{"text":": SAP gateway port used for secure communication. The port number is ","type":"text"},{"text":"48$$","type":"text","marks":[{"type":"strong"}]},{"text":", $$ being the instance number of a particular application server","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"SNC partner name:","type":"text","marks":[{"type":"strong"}]},{"text":" Distinguished name of SAP system, pre-filled from SAP profile parameter ","type":"text"},{"text":"snc/identity/as","type":"text","marks":[{"type":"em"}]},{"type":"hardBreak"},{"type":"hardBreak"},{"text":"Save the configuration when completed, but do not start the JCo yet.","type":"text"},{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"There are two more configuration pieces to complete before JCo can properly start and register on the SAP gateway.","type":"text"},{"type":"hardBreak"},{"text":"In ","type":"text"},{"text":"SU01","type":"text","marks":[{"type":"strong"}]},{"text":", activate SNC for ","type":"text"},{"text":"RFC user","type":"text","marks":[{"type":"strong"}]},{"text":" dedicated to JCo communication, filling ","type":"text"},{"text":"SNC name","type":"text","marks":[{"type":"strong"}]},{"text":" dedicated to JCo.","type":"text"},{"type":"hardBreak"},{"text":"Despite the user no longer being configured in /DVD/JCO_MNG, it is used by matching the SNC name entered here and the Distinguished name configured in JCo PSE. ","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":30.0},"content":[{"type":"media","attrs":{"width":643,"id":"2ae71355-1b5c-4818-a8a0-15c58a5106b3","collection":"contentId-4145414348","type":"file","height":352}}]},{"type":"paragraph","content":[{"type":"hardBreak"},{"text":"Secondly, via ","type":"text"},{"text":"SM59","type":"text","marks":[{"type":"strong"}]},{"text":" ","type":"text"},{"text":"activate SNC ","type":"text","marks":[{"type":"strong"}]},{"text":"in the RFC destination dedicated to communication between SAP and JCo and fill JCo Distinguished name again in the ","type":"text"},{"text":"Logon & Security","type":"text","marks":[{"type":"strong"}]},{"text":" tab (SNC options button):","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":45.0},"content":[{"type":"media","attrs":{"width":1251,"id":"c0ac0972-d957-4a7f-a05f-d1200248880e","collection":"contentId-4145414348","type":"file","height":740}}]},{"type":"paragraph","content":[{"type":"hardBreak"},{"text":"Having all SNC prerequisites met, Java Connector can be started.","type":"text"}]}]}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"Sample JCo configuration files with SNC enabled","type":"text"}]},{"type":"codeBlock","content":[{"text":"nsz:/usr/sap/NSZ/D00/work/dvd_conn/jco217 # cat config.jcoServer\nversion=217\njco.server.gwhost=127.0.0.1\njco.server.gwserv=4800\njco.server.connection_count=10\njco.server.progid=DATAVARD_JAVA_CONN\njco.server.repository_destination=ABAP_AS_WITH_POOL\njco.server.worker_thread_min_count=5\njco.server.worker_thread_count=20\njco.server.snc_mode=1\njco.server.snc_qop=3\njco.server.snc_myname=p:CN=JCO_RFC, OU=DVD, C=DE\njco.server.snc_lib=/sapmnt/NSZ/exe/uc/linuxx86_64/libsapcrypto.so\n\nnsz:/usr/sap/NSZ/D00/work/dvd_conn/jco217 # cat config_as.jcoDestination\njco.client.client=001\njco.client.sysnr=00\njco.client.peak_limit=10\njco.client.ashost=127.0.0.1\njco.client.snc_mode=1\njco.client.snc_qop=3\njco.client.snc_myname=p:CN=JCO_RFC, OU=DVD, C=DE\njco.client.snc_partnername=p:CN=NSZ,OU=DVD,C=DE\njco.client.snc_lib=/sapmnt/NSZ/exe/uc/linuxx86_64/libsapcrypto.so","type":"text"}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Upgrading Java connector","type":"text"}]},{"type":"paragraph","content":[{"text":"This is a list of steps to do when you update your SNP software and you would like to switch to a new version of the Java connector. ","type":"text"}]},{"type":"panel","attrs":{"panelType":"info"},"content":[{"type":"paragraph","content":[{"text":"With SAP JCO version 3.1 additional authorization is required for JCO’s RFC user, which allows execution of function modules in function group RFC_METADATA.","type":"text"},{"type":"hardBreak"},{"text":"Please make sure the RFC user has all authorizations listed in “","type":"text"},{"text":"SAP RFC role and user","type":"text","marks":[{"type":"strong"}]},{"text":"” section of this page.","type":"text"}]}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Open transaction ","type":"text"},{"text":"/DVD/JCO_MNG","type":"text","marks":[{"type":"code"}]}]},{"type":"mediaSingle","attrs":{"layout":"center","width":65.0},"content":[{"type":"media","attrs":{"width":1072,"id":"041e2298-d7cf-4bc1-9bca-705b6e511c1a","collection":"contentId-4145414348","type":"file","height":300}}]},{"type":"paragraph"}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Double-click the current working connector and click ","type":"text"},{"text":"Copy config","type":"text","marks":[{"type":"code"}]}]},{"type":"mediaSingle","attrs":{"layout":"center","width":65.0},"content":[{"type":"media","attrs":{"width":1069,"id":"d516097c-6f19-4710-b6b3-99008eefa302","collection":"contentId-4145414348","type":"file","height":262}}]},{"type":"paragraph"}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Double-click the latest connector, enter ","type":"text"},{"text":"Edit mode","type":"text","marks":[{"type":"code"}]},{"text":", then click ","type":"text"},{"text":"Paste config","type":"text","marks":[{"type":"code"}]},{"text":", then fill the ","type":"text"},{"text":"RFC Usage","type":"text","marks":[{"type":"code"}]},{"text":" field with the same RFC that was used with the old connector","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":65.0},"content":[{"type":"media","attrs":{"width":1064,"id":"911311b6-a5d4-44ab-8ed6-095ec783756c","collection":"contentId-4145414348","type":"file","height":268}}]},{"type":"paragraph"}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Switch to the ","type":"text"},{"text":"Dependencies","type":"text","marks":[{"type":"code"}]},{"text":" tab and make sure you are using the latest libraries for your connector","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":65.0},"content":[{"type":"media","attrs":{"width":967,"id":"e8fafb34-222e-451b-b0e3-0d04b1e9bf90","collection":"contentId-4145414348","type":"file","height":229}}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Switch back to the ","type":"text"},{"text":"General","type":"text","marks":[{"type":"code"}]},{"text":" tab and click ","type":"text"},{"text":"Restart","type":"text","marks":[{"type":"code"}]},{"text":" for every Application server","type":"text"},{"type":"hardBreak"}]},{"type":"mediaSingle","attrs":{"layout":"center","width":65.0},"content":[{"type":"media","attrs":{"width":1066,"id":"39d273b9-1ede-4316-82e8-b48dd8012877","collection":"contentId-4145414348","type":"file","height":294}}]},{"type":"paragraph"}]}]},{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"Restarting the connector can cause running Glue/Outboard jobs to fail. Either do the Restart the connector in quiet hours or make sure you re-run the failed jobs.","type":"text"}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Copying Java connector","type":"text"}]},{"type":"paragraph","content":[{"text":"Sometimes it may be needed to COPY the JCo instance and create a version from it. When JCo is copied, the separate JCO_HOME directory is used and above the new JCO_HOME, the JRE process is started. Therefore new JCo has its own space for configuration and logs.","type":"text"}]},{"type":"paragraph","content":[{"text":"Possible use cases for JCo COPY:","type":"text"}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Vertical scaling: When needed more JCo instances (JRE processes and each can handle different tasks/storage)","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Versioning: When needed version of JCo for a different purpose","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"JCo testing: To make different instances for testing and concern separation ","type":"text"}]}]}]},{"type":"panel","attrs":{"panelType":"info"},"content":[{"type":"paragraph","content":[{"text":"With SAP JCo COPY functionality the new JCo copy/instance is created with increased subversion number. ","type":"text"}]},{"type":"paragraph","content":[{"text":"For example when copying from 233, then JCo copy is created with ","type":"text"},{"text":"ID: 233.1","type":"text","marks":[{"type":"strong"}]},{"text":". If another copy is again created, then with ","type":"text"},{"text":"ID: 233.2","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"}]}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Open transaction ","type":"text"},{"text":"/DVD/JCO_MNG ","type":"text","marks":[{"type":"code"}]}]}]}]},{"type":"mediaSingle","attrs":{"layout":"align-start","width":65.0},"content":[{"type":"media","attrs":{"width":1150,"id":"01e3ed03-96bd-46e2-a9f4-409b9dbd6c09","collection":"contentId-4145414348","type":"file","height":283}}]},{"type":"paragraph","content":[{"text":"2. Click on “Copy JCO”","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"align-start"},"content":[{"type":"media","attrs":{"width":446,"id":"6d536c6c-6804-4fe0-91f9-d46bdd1c475c","collection":"contentId-4145414348","type":"file","height":182}}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Copy config from Java RFC","type":"text","marks":[{"type":"strong"}]},{"text":": Copies JCo configuration from given RFC","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Copy config from version ID","type":"text","marks":[{"type":"strong"}]},{"text":": Copies JCo configuration from given JCo ID","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Use default values","type":"text","marks":[{"type":"strong"}]},{"text":": Use defaults","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Java version","type":"text","marks":[{"type":"strong"}]},{"text":": Read-only field as a newly created copy of JCo will be created from the given ","type":"text"},{"text":"Java version","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Description: ","type":"text","marks":[{"type":"strong"}]},{"text":"Description of a newly created copy of JCo","type":"text"}]}]}]},{"type":"paragraph","content":[{"text":"3. Newly created copy of JCo","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"align-start","width":50.0},"content":[{"type":"media","attrs":{"width":1151,"id":"c85c83f9-9ee2-4260-83f9-163dc3398e0a","collection":"contentId-4145414348","type":"file","height":266}}]},{"type":"paragraph","content":[{"text":"By default, it has adjusted JCO_HOME (Install directory) and all relevant settings in Advanced Tab to point to the new JCO_HOME (233.1)","type":"text"}]},{"type":"paragraph","content":[{"text":"4. Set RFC to the new JCo instance","type":"text"}]},{"type":"paragraph","content":[{"text":"Go to the 'General' tab and assign the ","type":"text"},{"text":"RFC","type":"text","marks":[{"type":"link","attrs":{"href":"#Java-Connector-RFC"}}]},{"text":" to the Java connector.","type":"text"}]},{"type":"paragraph"}],"version":1}

Browser not supported