(DI-1911) Schedule the Monitoring of KPIs

For default KPIs, you may start their monitoring automatically, as is described in the chapter Start default monitoring. The default monitoring automatically creates and starts Collector jobs with default Monitoring profiles.
If you assigned a new Monitoring profile to a default KPI or created a custom KPI, it is necessary to create a Collector job to start the monitoring.

The Collector job runs periodically as a background job.

For more information about the individual fields in the Collector jobs tab, see Collector jobs.

A requirement for executing the monitoring, is that you assigned a Monitoring profile to a KPI (see the chapter (DI-1911) Define a Monitoring Profile for a KPI).

Create and schedule a Collector job

1. Go to the Collector Jobs tab in the main screen and click Create collector job.
   
   
   The system displays the dialog Collector job manager. This dialog has two sub-screens:
   1. Monitoring plan: for creating a new Collector job or for editing an existing one 
   2. Running collector jobs: an overview of already created Collector jobs 
      
      
2. Fill in the fields in the following boxes:
   
   • Definition:
     • System ID: system on which you want to monitor KPIs
       

     • Monitoring profile: monitoring profile of the KPIs. You may check the monitoring profile of your KPIs under Monitoring Settings > KPI definitions > Assigned profiles.
       

       Please note you may create and assign a KPI to several Monitoring profiles, but only one these profiles will be enabled during the monitoring.

       In the case you assigned a KPI to more monitoring profiles, see below the instructions on how to start or stop the monitoring of a KPI with a Monitoring profile.

       
       For more information about the Monitoring profile, see (DI-1911) Define a Monitoring Profile for a KPI.
       

   • Execution: execution of the Collector job, which may be Immediate after the Collector job is (re)started or you may choose a specific time and date of it start.
   • Period: time interval between the Collector job runs.
     

   • Retention time: how long data is stored on the central monitoring system. In the moment the retention time has elapsed, data will be deleted.

     The retention time doesn't apply to data which belongs to a time interval, which you specified before. See more information about the time interval specification in (DI-1911) Store Data Defined Through a Time Interval.

     
     

3. After the Collector job has been created or edited, click (Re)Start Collector job. The name of the created Collector job is displayed in the field Background Job Name.
   The following notification appears in the bottom left-hand corner.

4. After you started the Collector job we recommend to check the status of its execution. To perform this, view the icon in Last status in the Collector Jobs tab. The status may be as follows:

   • Finished - the last background job of the Collector job was finished successfully.

   • Aborted - the last background job of the Collector job was terminated by an error or cancelled by an user.

     To check the reason for the Collector job failure, go to the Messages tab or select the button Background Job Name for the aborted Collector job.

   • Not running - the background job of the Collector job was not started before.
5. To display results of the monitoring go to the KPI charts tab. All about how to display KPI results is described in the chapter (DI-1911) Display KPIs.
   
   

Change the monitoring settings of a Collector job

You may change the setting of a present Collector job.

To modify the Collector job, click Modify collector job for the .Proceed as described above.

Stop the monitoring of KPIs 

To stop the monitoring of KPIs assigned to a Monitoring profile on a specific system

1. Select the Collector jobs tab.
2. Find the Monitoring profile for the specific system, assigned to the KPIs, you want to stop monitoring.
3. Click Stop for the specific Collector job with the particular Monitoring profile.
   This operation stops the monitoring of KPIs on the selected system and with the assigned Monitoring profile. You can stop only scheduled and started Collector jobs.
   

Delete the monitoring of KPIs

In this step you may either delete the monitoring settings of a KPI and keep its historical data or delete both monitoring settings and the KPIs' historical data. 

To delete the monitoring of KPIs

1. Select the Collector jobs tab.
2. Find the Monitoring profile for the specific system, assigned to the KPIs, you want to stop monitoring.
3. Click Stop by the Collector job with the specific Monitoring profile.
4. Delete the Collector job. You have two possibilities how to delete a Collector job.
   1. Click Delete collector job.
      or
   2. Right-click on the selected Collector job and select Delete collector job. 
      
      
      
5. Then, choose if you want to
   
   
   • Delete the monitoring of KPIs, but keep the historical data of KPIs. In this case select No,keep data.
     Only the Collector job is deleted. All historical data of KPIs collected by this Collector job remains on the system and you can display it in charts. But, no further data is collected.

1. • Delete permanently all KPI data collected by this Collector job. In this case select Yes,del.data.
     All the historical data of the KPI is deleted. As the KPI isn't monitored and all its' data is deleted, you can't display it in charts.
     

     The deletion of a Collector job deletes all collected data with the exception of data collected in saved time intervals. For more information, see (DI-1911) Store Data Defined Through a Time Interval.
     

Start or stop the monitoring of a KPI with a Monitoring profile

A KPI can be monitored for a specific system only with one Monitoring profile.

In the case you want to start monitoring a KPI with a new Monitoring profile, you must first stop monitoring the KPI under its original Monitoring profile.

To perform this, please follow these steps: 

1. Find the Collector job with the Monitoring profile and the system which you would like to stop.
2. Stop the Collector job as described in 464912598
3. Schedule and start the new Collector job with the new Monitoring profile and system, as described in 464912598.