In the Datavard Validate setting, you can manage various settings for all parts of the Datavard Validate tool. You can access the Settings in Datavard Validate Dashboard by clicking the corresponding button, or by pressing Shift+F5.

_{Validate Settings} 

Settings are divided into Tabs based on the area they are focusing on:

• Backend Settings
• Test Management Settings
• Front End Settings

Settings can be included in the transport request via functionality 'Transport Settings'.

_{Inside Datavard Validate Settings}

Backend Settings

In the Datavard Validate Backend settings tab, you can manage parameters for Datavard Validate Backend test scenarios separately by the 'Edit' button and customize reporting statuses as described in the section ('Reporting Status'). Parameters are divided into folders per test scenario. Individual settings are described in the next subchapter. 

^{Backend settings}

Datavard Validate Backend Settings Parameters:

DTP

DrillDown

Listcube

Query

Report

Table

System Performance

Other

• Mass Execute Seq. Wait Time
  • Maximum number of seconds Datavard Validate waits for the test step to finish when the mass execution of Test Cases is sequential.

Test Management Settings

_{Test Management Settings}

For more information about "Scheduling Checker Settings" see Test Plan Scheduling section, specifically the Prerequisites part.
In section "Parameter Settings", various parameters regarding Test Management can be managed. Currently, one parameter "DISPLAY_TMPL_TYPE" is present, which states whether the Test Case types should be viewed in the Test Plan tab.

_{Test Case types in Test Plans tab}

(OLD) In section "MS Word Templates", MS Word templates for Manual Test Case and for Status Document can be managed. If you upload more template documents, only the first document from the top of uploaded documents will be used, therefore you need to delete the old template document before you attach a new one. (Tip: you can export document before deletion)

_{Business document navigator with Validate templates (fixed layout)}

(NEW) By clicking on the button Manage Docx Template you will open Validate repository for Microsoft document templates. Here you can add your own templates in your own layout which are containing test plan-specific placeholders. All templates uploaded to a repository DVD_VAL_DOCX_TEMPLATES are listed in the generator for test plan documentation.

_{Validate repository for Microsoft document templates (customizable layout)}

In section "Other Settings", Test Case statuses can be managed.

Front End Testing Settings

Under Front End Testing Settings you can manage the parameters of the Datavard Validate Front End (Web Templates, Web Intelligence, Design Studio, BEx) scenario. Individual settings are described in the next sub-chapter. 

General settings:

• Excel settings: This setting is required because web pages are built by Javascript, which loads cannot be determined and therefore we allowed a time-out limit for a web page to load.
  
  • Excel time-out limit

How long (in seconds) should excel look for a particular HTML element (table, tab on the screen, etc.)

• Execution settings
  • Repeat execution in case of error

The number of times a test case is executed in the case an execution ends with an error

• • Time for user input

How long (in seconds) execution of a report is postponed after it was loaded in Internet Explorer. You can use this time for the manual input (e.g. filtering values). This setting should be used with caution as it goes against the automation principle. We recommend preparing reports for testing, which don't need input for their execution.

BOBJ servers settings: in this option, you can define the server address, ports for BOBJ, and provide a description. It is possible to specify several servers and also test directly the connection by clicking Test connection.

Design studio settings:

• Java bin path

Java is required to test documents that are saved on NetWeaver. It is necessary to specify in this field the path to your Java on the system. If a keyword shortcut for this path is created, you can enter this keyword in this field (usually "Java").

• Items per Page 

It is a property of the Design Studio BOBJ document, which ensures that during a test case execution the scrolling in a document table works properly. To obtain the value of this property, go to the BusinessObjects Central Management Console > Applications and choose in the context menu of the Design Studio Runtime > Manage Properties and copy the value of the field Items Per Page into this setting.

^{Front end settings}

Other settings:

These settings are advanced and should be changed only after consultation with Datavard.

• Wait time in logon dialog load

Time in seconds after every change of a window, which is used to detect correct logon dialogs and fill the required fields. This setting is currently relevant for BEx testing.

• Technical log

Turns on/off technical logs, which provide more detailed information about the test case execution. This setting is currently relevant for Web Intelligence and available only as a specific setting of a test plan (see the section 14975949)

• HTML docs load timeout

How long (in seconds) excel should look for a particular HTML document. This setting is currently relevant for Web Intelligence and available only as a specific setting of a test plan (see the section 14975949)

• WEBI table load wait limit 

How long (in seconds) excel should wait to load a particular table in an HTML document. This setting is currently relevant for Web Intelligence and available only as a specific setting of a test plan (see the section 14975949)

• Log error if table not found

If a table isn't found in the output of the Web Intelligence report and this setting is switched to true, the variant execution ends with an error instead of a warning. This setting is currently relevant for Web Intelligence.

For settings recommendations see the section (DV-2111) Settings Recommendations.

HP ALM Integration Settings

In the Datavard Validate HP ALM Integration settings tab, you can set the following values that are required for replication of Datavard Validate objects to the HP ALM server: 

• Connection settings
  • URL with port – URL path to HP ALM server together with the port used for standard web browser connection to this server (usually 8080)
  • ALM domain – HP ALM domain where Datavard Validate objects will be replicated
  • ALM project – HP ALM project where Datavard Validate objects will be replicated
• User settings
  • User name and password that exists in HP ALM server and is authorized to access ALM domain and project.
  • Password is optional and when it is entered, it is stored in a non-readable form. When no password is entered, you are prompted with a password pop-up when executing the replication.
• Integration settings
  • Test case path – folder in HP ALM Test Plan area, where all Datavard Validate Test cases will be replicated
  • Test plan path – folder in HP ALM Test Lab area, where all Datavard Validate Test plans will be replicated
• Status mapping
  • Table with all Datavard Validate Test case and Test plan statuses that can be mapped to HP ALM statuses (F4 help supported).

Connection settings, user settings, and integration settings are saved as a template with a unique template name. Initially, HP ALM Integration contains the default template 'GLOBAL'. Users can save another set of settings as templates. The template can be user-specific, which means it is available only to logged user who created it. Status mapping is independent of templates.

_{HP ALM Integration Settings} 

Test plan specific settings

For Datavard Validate Backend Test Cases and Front End Test Cases you can set some settings specific for a given Test Plan, which will override general settings.

Supported test plan specific settings:

• Backend 
  • all of the backend settings are also available as test plan specific settings
• Front End
  • User input allowed –  time for user input (in seconds)
  • HTML docs load timeout – time for a load of HTML document (in seconds) – Web Intelligence exclusive setting
  • WEBI table load wait limit – time for a load of the table in HTML document (in seconds) – Web Intelligence exclusive setting
  • Technical log – turn on/off technical logs – Web Intelligence exclusive setting

_{Test Plan Specific Settings}

_{Inside Datavard Validate Test Plan Specific Settings - backend settings}

_{Front End Test Plan Specific Settings}

Transport of settings

The 'Transport settings' button allows you to prepare transport with necessary table content to transport settings of Datavard Validate so they can be automatically reapplied when the system is refreshed. Checkbox 'Include test case dependent settings' gives the option to include Test Case dependent settings. Test Case dependent settings contain object IDs which are necessary as internal number range for distinct identification of Test Cases and Test Variants. It is recommended to include test case-dependent settings when the system is going to be refreshed and previous Test Cases are going to be imported again to prevent object IDs from overwriting. Transport request is created as transport of copies.

^{Transport settings preparation} 

How to handle the transport of test cases and settings:

1. Create transport of Test Cases that will be imported to the system after the refresh. Release transport.

2. Create transport of settings. Mark checkbox to include Test Case dependent settings. Release transport.

3. Refresh the system and install Datavard Validate again.

4. Import transport with settings.

5. Import transport with Test Cases.

INTERFACE FOR BACKEND VARIANT GENERATION

Datavard Validate comes with the option to generate backend variants from custom ABAP programs. If you want to generate any backend variants Query/ListCube/DTP/Table/Drill Down from your own ABAP program, you can use Datavard Validate API classes, available in /DVD/EQS_GEN package. Each of these classes contains one method 'Generate' that generates the appropriate type of variant based on importing parameters supplied. 

_{Datavard Validate API for variants generation package}

For each type of backend variant, a demo report also exists, which contains comments and examples of how these classes can be used to generate variants directly from ABAP.
Reports:
/DVD/EQS_GEN_DRILL_VARIANTS – demo report for the generation of Drill Down variants
/DVD/EQS_GEN_DTP_VARIANTS – demo report for the generation of Transformation testing variants
/DVD/EQS_GEN_LISTCUBE_VARIANTS – demo report for the generation of ListCube variants
/DVD/EQS_GEN_QUERY_VARIANTS – demo report for the generation of Query variants
/DVD/EQS_GEN_TABLE_VARIANTS – demo report for the generation of Table variants 

DATAVARD VALIDATE BACKEND TESTING USER AUTHORIZATION

As in Datavard Validate Backend testing you can create snapshots of data from all the available system InfoProviders, queries, and tables. For users therefore it is sometimes necessary to restrict their access to this information. 
Datavard Validate Backend testing provides three BADI Definitions that you can implement using your own logic to deny access to restricted data images. The following BADIs are available in package /DVD/EQS:

• /DVD/EQS_BADI_AUTH_INFOPROV – BADI that restricts access to image data for ListCube, DrillDown, and Transformation testing variants based on InfoProvider name.
• /DVD/EQS_BADI_AUTH_QUERY – BADI that restricts access to image data for Query testing variants based on query technical name.
• /DVD/EQS_BADI_AUTH_TABLE – BADI that restricts access to image data for Table testing variants based on DB table technical name.

In a BADI implementation class, the exception /DVD/CX_EQS_AUTH should be raised when a user is not allowed to review the data of a specific image. As per customer needs transport requests with default authorization implementation can be delivered together with release transports (see the chapter (DV-2111) Appendix A - DVD Authorization concept for more information).