When you click on the button:

in the RFC or press Shift + F5, the system displays the System maintenance screen. On this screen it is possible to maintain relevant system settings.

In the left side under System maintenance you can change the RFC Destination, the response time (Timeouts) and the Description.

System maintenance

Children display

(DI-1805) System groups

(DI-1805) Monitoring areas

(DI-1805) Configuration Properties

(DI-1805) Delete a System From the Monitoring Pool

(DI-1805) Assign a Monitoring Area to a Satellite System

(DI-1805) Assign a System to a System Group

(DI-1805) Configuration of Parameters

(DI-1805) Additional Licensed Functionality

(DI-1805) Restriction in Monitoring

(DI-1805) Time Intervals

(DI-1805) Message Groups

(DI-1805) Message Notification

(DI-1805) User List

_{System maintenance}

Correct setup of response time is important in the case there is a slow connection between systems. If the response time is exceeded, then the system is displayed as offline or inaccessible. You can access this window with a double click on the Timeouts field by the particular system.

Setup of response time

Server list

displays list of servers for a selected system. Here, it is possible to specify which server(s) should be monitored.

_{_{Server list}}

System parameters

displays system parameters which are used for selected system. It is possible to add new or adjust existing system parameters.

_{System parameters}

System status KPI

Contains one KPI which status you want to watch directly on Fiori Dasboard.

_{System status KPI}

Server types

displays server type for a selected system. Server types monitored by the Datavard Insights tool:

_{List of supported server types}

_{Server types}

Browser not supported