(DI-2211) Working Tabs

This chapter describes briefly, what information you can find under the individual tabs on the main screen.

System info

In this tab, the following information about all monitored systems is displayed:

• Monitored system - basic information about the monitored system (for example, generated System ID, system description, type, or a defined list of supported monitoring areas). 
  
• SAP system information - information about the installed SAP system version 
• Host data - information about the hardware configuration of the hosted machine  
• Database data - information about the central database system
• Connection data - information about the connection to a monitored system  
  • RFC destination - it shows the RFC destination which is used when connecting to the remote SAP system (if the remote system is not a SAP system, this value might be empty).
  • Maximum time for PING - defines the maximum timeout for RFC ping in seconds. This value might be changed if there is a need to wait for a longer time.
  • Check button - user can easily check, whether the connection for the added system is valid and working.
• Server types - information about defined (DI-2211) System Settings Maintenance for the system. The user might modify the server type in External server types view (you might redirect into this view by clicking the button  next to the server types field). 

At the bottom of this tab is displayed a list of servers. This list provides an overview of all servers, their names, the type of the server (application or database), hostname, the number of the CPU(s), RAM size, server location, and description. Into this list are  included also servers that might serve as failover servers: 

• Application servers for SAP system which are in Passive state (Locality field set to PASSIVE)
• HANA nodes which are configured as Standby nodes on HANA database (Locality field set to STANDBY)

This special group of servers (PASSIVE or STANDBY) is not monitored by default and behaves as Inactive servers. It serves more for information purposes that such a special group of servers is available and configured on the monitored system. If such servers are switched into the active state, the monitoring for these servers is automatically started. 

If there is a flag in the field Don't mon., then the server is excluded from monitoring.

Collector jobs

Collector jobs displays all Collector jobs for monitored systems and provides information regarding their statuses. From this tab, you may control and check the Collector job runs.

For more information about the functionality, see the chapter (DI-2211) Schedule the Monitoring of KPIs.

In the list of Collector jobs, the following information is displayed:

• SID – System ID for which a Collector job has been created.
• Profile – Monitoring profile of a KPI assigned to the Collector job. For more information, see the chapter (DI-2211) Define a Monitoring Profile for a KPI.
• Status icon and Job status – Status of a Collector job. The Collector job can have the following statuses:
• Not running – Not scheduled Collector job
• Scheduled – Collector job is scheduled for periodical runs in the future
• Waiting – Collector job is waiting for free work processes
• Running - Collector job is currently running
• Period value / Period type – how often a Collector job is running.
• Collector job run
•  – Stops and cancels the scheduled Collector job, if the Collector job is running.

•  – Starts the Collector job if the Collector job isn't running.

  If any collector job is in a suspended state (e.g. suspended by SAP standard functionality before any system activities), it is not possible to start or stop the job and the following message is raised "It is not allowed to &1 suspended jobs for system '&2' and profile '&3'". In this scenario, the suspended job must be handled manually by your basis team into an unsuspended state before starting the collector job again. 

• Execution – The execution of a Collector job may be immediate or scheduled on a specific date and time.
• Start date/Start time – Date and time of the initial run of a Collector job.
• Retention time(days) – How long old collected data is stored by the Collector job. Data older than retention time is automatically deleted with the exception of data, which is excluded from deletion, see the chapter (DI-2211) Store Data Defined Through a Time Interval.
• Background Job Name  – Name of the background job of the Collector job. Clicking on this button executes the transaction SE37 which displays this job.
• Last status icon and Job last status  – Status of the last job run. The following statuses are possible:
• Finished – The last background job of a Collector job finished successfully
• Aborted – The last background job of a Collector job terminates due to an error or is canceled by the user
• Not running – The Collector job wasn't started
• Delay[s] – Any delay of current background job in seconds while waiting for a free work process.
• Run date/Run time – Date and time of the current background job execution.
  
• Duration – How long has the current background job been running.

Collector jobs

• Last delay – Delay of the last background job in seconds when it waited for a free work process.
• Last run date/Last run time – Date and time when the last background job has been started.
• Last duration – How long the last background job of a Collector job was running.
• Remaining time – Time in seconds after which the next run of a Collector job will occur.
• Next run date/Next run time – Date and time of the next Collector job run.
• Create date/Create time – Date and time of a background job creation of a Collector job.
• Creator name – The user who started/stopped the background job of a Collector job.

If you double-click on the Collector job record in the list, then all information is displayed in detail at the bottom section.
In the top bar, the menu of a Collector job list is available which contains all standard buttons for working with the ALV list and which allows you to sort, filter, etc.
In addition, a Refresh button  is available along with the information about the last time of a refresh.

KPI charts

All collected KPIs of monitored systems are represented in the form of charts within this tab.
In these charts, you can view the behavior of monitored KPIs with respect to the time and systems you specified. Each chart describes one measured KPI in a selected time interval for systems and servers that have been selected in System landscape.

In the context menu of a KPI chart area, a KPI context menu is displayed. You can find a description of all available functions of the context menu in the chapter (DI-2211) KPI Tree and Context Menu.

For more information on how to display KPIs, see the chapter (DI-2211) Display KPIs.

KPI mix

By using the KPI mix tab, you can display several KPI series in one chart and compare dependencies between all measured and displayed KPIs in this chart. For more information about the KPI mix chart, see the chapter (DI-2211) Display Several KPIs in KPI Mix Chart.

Messages

The Messages tab displays the status of messages identified by CrystalBridge® Monitoring (for example, during the collection of KPIs for the monitored system). Each message contains a text description with some additional information (when it occurred, on which system/server, and the type of the message). 

There are three standard types of messages:

• - OK / successful messages
• - Information / alert messages
• - Error messages

Displayed messages are dependent on the selected systems or servers in System landscape. In this tab, you might use standard ALV operations such as sorting, filtering, aggregating, etc.

There is a possibility to display messages in aggregated view or in non-aggregated view by using the checkbox Use aggregated view located above the ALV output. 

Aggregated view

By default, messages are displayed in an aggregated view. The benefit of aggregated view is that the user can see all same occurred message texts only once in ALV output with their total number of occurrences per each message (column Count). This total number of occurrences represents all occurrences of the specific message for the whole time (not only for a defined time period to display data). The columns for date and time display the last time when this message was reported. 

If the user double-clicks the row for a specific message in aggregation view, the additional details are displayed in the following pop-up window (e.g. time, when this message first occurred or the number of all occurrences for this message). 

Non-aggregated view

If a non-aggregated view is used to display messages, this view displays each message occurrence as a separate row in the ALV output. This view should be used in a case when you want to see occurred messages in a defined time period to display data (e.g. last two hours). It provides the user with an overview of all occurrences of the same message at different times (not only the last time when this message was reported). To be able to use a non-aggregation view, the configuration parameter (DI-2211) Configuration of Properties has to be disabled (empty value). If this configuration parameter is enabled (set to 'X'), it does not save each message occurrence into the database table and no data can be loaded and displayed. 

If the user double-clicks the row for a specific message in the non-aggregation view, only the technical name of the collector with the occurred message is displayed.

At the top of the Messages tab is a list box based on which you can filter displayed messages. This list box represents the available (DI-2211) Message Groups. The customizing view for Message groups can be directly accessed by clicking the button Message groups.

You can find technical details of the message in its long description by double-clicking on the message row and the long description button. The relevant message ID and number need to be specified in the chapter (DI-2211) Message Groups. 

Technical Message groups 

There are two message groups that are not available in the customizing and are not modifiable. 

DEFAULT

By default, this message group is selected when the application has started. This view displays all messages except the excluded ones. You can specify a list of messages to be excluded in (DI-2211) Message Groups message group 

All messages (with excluded)

This group displays all messages also with the excluded ones.

Details 

This tab contains additional KPI information collected from the monitored systems and stored in a Detail table. It displays a list of collected detail tables by default (you can adjust a setting to display all available detail tables with the not collected ones in (DI-2211) User Display Settings). You might search and filter over this list by technical name or by displayed description for a detail table. Next to the list of detail tables, there are displayed collected details for a KPI. Over these details is possible to perform all standard ALV operations like sorting, filtering, aggregating, etc.

Detailed KPI information from monitoring

 You can also find some technical information about a detail table by clicking the icon .  

More information can be found in the chapter (DI-2211) KPI Details Displayed in a Detail Table.

Alerts

Alerts display messages during the monitoring and collecting of KPIs, where an event occurs to one or more specific KPIs' values. Listed below are some examples of events when an alert occurs:

• Massive short dumps within a short period of time
• System downtime or unavailability
• System stops/restarts
• Typical peaks or downs in system performance
• Start/end of SLO operations (conversions or migrations)
• Users working in the system during conversions and many others

Such an events occur as long as the corresponding KPI values are outside of the threshold limit. If events last for a long time, then the alerts keep informing you that such events are still occurring and enable you to keep track of and monitor the event's progress.

More information can be found in the chapter (DI-2211) Alert Definition

Through an event occurrence, the process is recorded and stored within the Alerts tab. There, you can find an ALV list of occurred events. Each line of the list represents one event. It has information about the system and the server (if the KPI of the event is server-specific).
The type of alert informs you about the alert status as follows:

• - Success event
• - Warning event
• - Issues event
• - Error event

Count displays the number of occurred event alerts. Other information displayed here is – when an event has started and when it has ended (if it has ended), the event's description, etc.

_{Occurred events}

With this ALV list of messages, it is possible to perform all standard ALV operations like sorting, filtering, aggregating, etc.
For a more detailed view of an event, just double-click on a line.

_{Detail output}