(Glue-2205) SNP Glue™ Objects Generation

The main screen is divided into multiple sections. Each section is dedicated to specifying parameters for different objects or functionality settings. You can find Source selection, SNP Glue™ table generation, Extractor generation, Extractor 2.0 generation, and Settings parameters on the main screen.

Open

Source selection

This section specifies the list of source objects for which we want to generate SNP Glue™ objects. You need to select the object type and select an option specifying the selection of objects.

Open

For internal SAP objects

For external tables

Parameters:

• Source type - Defines the type of all objects specified by the selection. SAP tables, Tables from External storage, DSOs, InfoCubes, and ADSOs are available.

• Storage ID (only for External) - Defines the storage ID from storage management where the External table is located

• Table is View (only for External) - Define if the table on external storage is/isn’t view

SNP Glue™ table generation

This section specifies the way SNP Glue™ tables should be generated. The selection can be adjusted by double-clicking the row in ALV Grid and adjusting values in the Settings section.

Parameters:

• Name prefix - Prefix of the SNP Glue™ table. E.g. if ZGL_ is entered, the SNP Glue™ table with the name ZGL_MAKT will be generated for SAP table MAKT (generally, the SNP Glue™ table name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Name suffix - Suffix of the SNP Glue™ table. E.g. if _TAB is entered, the SNP Glue™ table with the name MAKT_TAB will be generated for SAP table MAKT (generally, the SNP Glue™ table name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Package - Package in which you want to save your generated objects.

• Folder - Folder in which you want to save your generated objects. Only available if allowed in SNP Glue™ settings (/dvd/gl_sett). If the folder does not exist, it will be generated.

• Storage ID - Target storage ID.

• Meaningful fields - Flag indicating whether Meaningful fields functionality should be used.

• Add deletion flag - Flag that adds a field for the deletion flag.

• Do not activate - When checked, only objects with status saved will be generated.

• Add SNP Glue™ request field - When checked, the field GLREQUEST will be added to the SNP Glue™ table structure.

• Set SNP Glue™ request as key - When checked, the field GLREQUEST will be a part of the primary key in the SNP Glue™ table structure.

• Settings for binary storage - Setting specific for binary storage. These settings will be ignored when transparent storage is used. More information can be found in the chapter (Glue-2205) Create SNP Glue™ table on File storage.

Extractor generation

This section specifies the way SNP Glue™ Extractor objects should be generated. The selection can be adjusted by double-clicking the row in ALV Grid and adjusting values in the Settings section.

Parameters:

• Name prefix - Prefix of the Extractor 1.0 object, E.g. if ZGL_ is entered, the Extractor object with a name starting with ZGL_ will be generated (generally, the SNP Glue™ table name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Name suffix - Suffix of the Extractor 1.0 object, E.g. if _TAB is entered, the Extractor object with a name ending with _TAB will be generated (generally, the SNP Glue™ table name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Package - Package in which you want to save your generated objects.

• Target SNP Glue™ table ID - ID of generated SNP Glue™ table which will be set as a target. (This is the ID from the SNP Glue™ table generation section)

• Delta type - Delta type used for data extraction.

  • Read deleted entries - When checked with Trigger delta, extraction will also transfer deleted records.

• Skip initial full load - When checked, the initial extraction will transfer no data. Just delta will be initialized.

• Truncate target table - When checked, the target table will be truncated (data will be deleted) before each extraction.

• Mark key fields for selection - When checked, the fields from the primary key will be used for selection in SNP Glue™ Variants.

• Do not activate - When checked, only objects with status saved will be generated.

• Variant prefix - Prefix of the Variant (generally, the SNP Glue™ Variant name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Variant suffix - Suffix of the Variant (generally, the SNP Glue™ Variant name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Variant package size - Package size used for SNP Glue™ Variant. This parameter specifies the number of rows transferred to the target storage within a single package.

Extractor 2.0 generation

This section specifies the way SNP Glue™ Extractor 2.0 objects should be generated. The selection can be adjusted by double-clicking the row in ALV Grid and adjusting values in the Settings section.

Parameters

All parameters are divided into 4 sections:

General

• Name prefix - Prefix of the Extractor 2.0 object E.g. if ZGL_ is entered, the Extractor 2.0 objects with a name starting with ZGL_ will be generated (generally, the SNP Glue™ table name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Package - Package in which you want to save your generated objects.

• Folder - Folder in which you want to save your generated objects. Only available if allowed in SNP Glue™ settings (/dvd/gl_sett). If the folder does not exist, it will be generated.

• Source object type - Type of the source object

  • DDIC - DDIC object

  • GL_TAB - SNP Glue™ table

  • QUEUE - SNP Glue™ Queue object

• Source object ID - For the DDIC source object type the value should be “0”. This is automatically added after entering the DDIC source type and pressing enter.

• Target object type - Type of the target object

  • GL_TAB - SNP Glue™ Table

  • QUEUE - SNP Glue™ Queue object

• Target object ID - ID of a generated object which will be set as a target (this is the ID from the SNP Glue™ table generation section).

• Do not activate - When checked, only objects with status saved will be generated.

Fetcher

• Name suffix - Suffix of the Extractor 2.0 Fetcher. E.g. if _F is entered, the Fetcher with a name ending with _F will be generated (generally, the SNP Glue™ table name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Delta type - Delta type used for data extraction.

  • Read deleted entries - When checked with Trigger delta, extraction will also transfer deleted records.

• Load type - Mode of the data read for extraction execution.

• Use deduplication - When checked, it removes duplicate values from a single data load, keeping only the latest value for each record. Relevant only to the ADSO source.

• Mark key fields for selection - When checked, selected fields from the primary key will be used for selection in SNP Glue™ Variants.

SNP Glue™ Table Consumer

• Name suffix - Suffix of the Extractor 2.0 SNP Glue™ Table Consumer. E.g. if _C is entered, the Consumer with a name ending with _C will be generated (generally, the SNP Glue™ table name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Enable merge - This flag enables merge functionality in the Consumer

Extraction Process

• Name suffix - Suffix of the Extractor 2.0 Extraction Process. E.g. if _P is entered, the Extraction Process with a name ending with _P will be generated (generally, the SNP Glue™ table name consists of <PREFIX>+<TABLE_NAME>+<SUFFIX>).

• Apply field routines - This flag automatically applies to all field routines.

Queue processing

The queue processing button will prefill automatically 2 groups of Extraction 2.0 objects necessary for Queue execution:

1. The first group is handling insertion into SNP Glue™ Queue ( from SAP table to SNP Glue™ Queue )

2. The second group is handling pulling data from Queue ( from SNP Glue™ Queue to SNP Glue™ table (any target) )

Executing object generation

When the parameters are filled, based on your requirements, you can proceed to object generation itself.

You can choose from two options. You can either generate objects in the dialog process by pressing the Generate button from the toolbar or generating objects in the background job by pressing Generate (background).

In case you choose Generate (background), the SAP standard dialog for background job scheduling will appear as shown in the following image:

In case you choose to Generate in the dialog process, you will see the pop-up with logs after object generation is finished. These logs will provide you with a general overview of objects that were generated using this functionality. In the following image you can see an example: