For the below-mentioned collectors, you may set a value for their parameters. These parameters are used in the collector's program and provide a generic setup of the collector's execution logic.
Through the setup of parameters, you may adjust the collector's program according to your requirements or system setup (e.g., you might influence the calculation of default KPI values or set up the general properties of a collector). For more information about collectors, see the chapter (DI-2202) Collectors.

To change the parameters of a collector, follow these steps

Go to the Settings > Collector settings (transaction /DVD/MON_COL).
Select a collector name from the below-mentioned list.
Double-click Parameters.
Check the list of available parameters.
1. each parameter has its own default value which cannot be changed. You might change this value in the next step.
Select a parameter for which you want to adjust its value
Double-click the sub-node Custom values.
Click New Entries (F5)
Enter the Profile name. This field defines for which profile will be this custom value of parameter applied. There are two possibilities how you can define the profile name:
1. Profile name without pattern - you need to fully specify the existing profile name (you might use the F4 help for this field).
2. Profile name with pattern - you might use the wildcard '*' to apply this custom parameter value for multiple profiles. Examples:
  - * : apply for all profiles
  - Z* : apply for all profiles which name starts with Z.
  - *5MIN : apply for all profiles which name ends with substring 5MIN
    
    Please try to avoid setup for non-unique combinations when using the patterns in the profile name.
    For example, the three values mentioned above (*, Z*, *5MIN) are not unique for the profile 'ZDEF_5MIN' (in such case, it will select the value defined for profile Z*, not for *5MIN).
Set the custom Value for this parameter

List of Default collectors with predefined Parameters and their default values:

You cannot create a new parameter, delete the existing parameter or change a default value of the predefined parameter for a default collector. This is possible only for custom collectors. You might find more information about parameters for custom collectors in the chapter Custom collector parameters.

Collector	Parameter name	Parameter value
/DVD/MON_BAT_CL_DB	NUM_RECORDS	10000
/DVD/MON_BW_CL_COL_ETL_PC	DAYS_BACK_THRESHOLD	1
/DVD/MON_BW_CL_COL_GET_D_IP	DAILY_IP_MAX_CHECK_TIME	86400
/DVD/MON_BW_CL_COL_GET_D_IP	DAILY_IP_MIN_PACK_STATS	50
/DVD/MON_BW_CL_COL_GET_D_IP	DAILY_IP_THRESHOLD_COUNT	100
/DVD/MON_BW_CL_COL_JAVAST_EVT	DELAY_TO_CHECK_RSDDSTATS	300
/DVD/MON_BW_CL_COL_JAVAST_EVT	JAVASTACK_COUNT_12503_X_MINUTES	60
/DVD/MON_BW_CL_COL_JAVAST_EVT	JAVASTACK_MIN_12503_VARIANCE	50
/DVD/MON_BW_CL_COL_NUM_RANGE	DIFFERENCE_THRESHOLD	0
/DVD/MON_BW_CL_COL_NUM_RANGE	SPEED_THRESHOLD	0
/DVD/MON_BW_CL_COL_PC	MAX_CHECK_TIME	3600
/DVD/MON_BW_CL_COL_QUERY_RT	TIME_PERIOD_IN_SECS	3600
/DVD/MON_BW_CL_COL_RSDDSTATS	DELAY_TO_CHECK_RSDDSTATS	300
/DVD/MON_BW_CL_COL_RSDDSTATS	EXCLUDE_COMPLEX_EXECUTIONS
/DVD/MON_BW_CL_COL_RSDDSTATS	SMALL_QUERY_MIN_NUMB_FOR_AVG	25
/DVD/MON_CL_COL_APPLOG	MAX_TIMERANGE_IN_HOURS	24
/DVD/MON_CL_COL_CTS	DELAY_TO_CHECK_TPALOG	0
/DVD/MON_CL_COL_CTS	REFRESH_BUFFER
/DVD/MON_CL_COL_ENQUEUE	OLDER_THAN_X_MINUTES	60
/DVD/MON_CL_COL_ENQUEUE_STAT	BIG_NUMBER_DIVIDE_BY	100
/DVD/MON_CL_COL_ENQUEUE_STAT	VALUE_OFFSET	23
/DVD/MON_CL_COL_GET_DUMP	COLLECT_FROM_ALL_CLIENTS	X
/DVD/MON_CL_COL_GET_WP	DIA_THRESHOLD	120
/DVD/MON_CL_COL_GET_WP	DIA_THRESHOLD_DIALOG_USER	120
/DVD/MON_CL_COL_GET_WP	RETURN_WPINFO	X
/DVD/MON_CL_COL_GET_WP	UPD_THRESHOLD	2
/DVD/MON_CL_COL_NUM_RANGE	DIFFERENCE_THRESHOLD	0
/DVD/MON_CL_COL_NUM_RANGE	PERCENTAGE_THRESHOLD	10
/DVD/MON_CL_COL_NUM_RANGE	SPEED_THRESHOLD	0
/DVD/MON_CL_COL_PI_MESSAGE	MAX_MESSAGES	200
/DVD/MON_CL_COL_RFC	PING_COUNT	4
/DVD/MON_CL_COL_SEND_TRANSMIT	DAYS_BACK_FOR_FIRST_RUN	1
/DVD/MON_CL_COL_SQL	USE_BIND_VARIABLES
/DVD/MON_CL_COL_SYS_FS	USE_DF_COMMAND	X
/DVD/MON_CL_COL_TAB_SIZE	MIN_TABLE_SIZE_THRESHOLD_MB
/DVD/MON_CL_COL_TAB_SIZE	TOP_N_TABLES
/DVD/MON_CL_COL_TAB_SIZE	UPDATE_TAB_STATS_ON_DB
/DVD/MON_CL_COL_UPD_REQ	DELAY_TO_CHECK_UPDATE_MIN	30
/DVD/MON_GRC_CL_COL_SEC_NOTES	SOLMAN_RFC_DESTINATION
/DVD/MON_GRC_CL_COL_SEC_NOTES	TYPE_OF_SYSTEM	ABAP
/DVD/MON_HDB_CL_COL_CPU	USE_SYS_STATISTICS
/DVD/MON_HDB_CL_COL_IO	USE_SYS_STATISTICS
/DVD/MON_HDB_CL_COL_MEM	INCLUDE_PERS_MEMORY_SIZE
/DVD/MON_HDB_CL_COL_OBJECTLOCK	LOCK_COUNT_OLDER_X_MINUTES	5
/DVD/MON_HDB_CL_COL_SQL_STMT	AGGREGATE_STATEMENTS	X
/DVD/MON_HDB_CL_COL_SQL_STMT	CHECK_ONLY_APP_STMT	X
/DVD/MON_HDB_CL_COL_SQL_STMT	MEMORY_SIZE_LIMIT_IN_MB	500
/DVD/MON_HDB_CL_COL_SQL_STMT	TIME_DURATION_LIMIT_IN_MS	100
/DVD/MON_HDB_CL_COL_SQL_STMT	TOP_RECORDS	100
/DVD/MON_HDB_CL_COL_TAB	INCLUDE_PERS_MEMORY_SIZE
/DVD/MON_HDB_CL_COL_TAB	PART_CNT_ABOVE_ROWS	1000000000
/DVD/MON_HDB_CL_COL_THREAD	MAX_DURATION_FOR_HANGING_SQL	60000
/DVD/MON_HDB_CL_COL_THR_SAMPLE	LIMIT_COUNT	50
/DVD/MON_HDB_CL_COL_THR_SAMPLE	SELECT_TOP	20
/DVD/MON_HM_CL_COL_DTP_QR	INIT_COLLECT_LAST_DAYS	90
/DVD/MON_HM_CL_COL_DU	BTC_SERVER_GROUP
/DVD/MON_HM_CL_COL_DU	LANGUAGE	EN
/DVD/MON_HM_CL_COL_PC	LOG_TABLES_FIRST_RUN_DAYS	90
/DVD/MON_HM_CL_COL_QU	BTC_SERVER_GROUP
/DVD/MON_HM_CL_COL_QU	INIT_COLLECT_LAST_DAYS	90
/DVD/MON_HM_CL_COL_QU	LANGUAGE	EN
/DVD/MON_IDOC_CL_COL_DETAIL	IDOC_MAX_SNAPSHOT_TIME	50
/DVD/MON_IDOC_CL_COL_EDIDC	COLLECT_FROM_ALL_CLIENTS
/DVD/MON_IDOC_CL_COL_EDIDC	IDOC_MAX_SNAPSHOT_TIME	1440
/DVD/MON_ORA_CL_COL_ALERTLOG	MAX_PERIOD_IN_DAYS	1
/DVD/MON_STAT_CL_COL_MODULES	INCLUDE_APPL_STAT	0
/DVD/MON_STAT_CL_COL_MODULES	MAX_PERIOD_IN_MINUTES	10
/DVD/MON_STAT_CL_COL_WORKLOAD	AGGREGATION_TIME_S	300

Browser not supported